Titan Pancake Stepper not working Looking for some help related to my E Thin Nema 17 Stepper that runs my E3D Titan Running Duet Wifi at 24v power This is the model of stepper im using its a small nema 17 [www.motors-biz.com] I triple checked the wiring and the left two wires on the connector are for one coil and the right two wires are for the other coil currently when i try and drive the motor it vibrates and get very hot I have also tried switching one coil pair incase they are fighting each other max Current Phase is 0.8A I have tried with800,and 600Mah with no difference it just shakes I cant get this thing to turn properly it moves easily by hand other code i use related to this motor M569 P3 S0 ; Drive E3D Titan goes backwards M350 E16 I0 ; Configure microstepping without interpolation M350 X16 Y16 Z16 I1 ; Configure microstepping with interpolation M92 X200 Y200 Z800 E418.5 ; Set steps per mm M566 X900 Y900 Z12 E100 ; Set maximum instantaneous speed changes (mm/min) M203 X9000 Y9000 Z360 E1800 ; Set maximum speeds (mm/min) M201 X500 Y500 Z250 E250 ; Set accelerations (mm/s^2) M906 X800 Y800 Z1200 E400 I10 ; Set motor currents (mA) and motor idle factor in per cent M84 S30 ; Set idle timeout Running 24v power https://reprap.org/forum/read.php?4,718247,718247#msg-718247 Sat, 12 Sep 2026 22:38:16 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,718247,718327#msg-718327 Re: Titan Pancake Stepper not working https://reprap.org/forum/read.php?4,718247,718327#msg-718327 dc42 Reprappers Sun, 30 Oct 2016 08:14:18 -0400 https://reprap.org/forum/read.php?4,718247,718278#msg-718278 Re: Titan Pancake Stepper not working https://reprap.org/forum/read.php?4,718247,718278#msg-718278 the_digital_dentist Reprappers Sun, 30 Oct 2016 00:59:53 -0400 https://reprap.org/forum/read.php?4,718247,718262#msg-718262 Re: Titan Pancake Stepper not working https://reprap.org/forum/read.php?4,718247,718262#msg-718262 makerparts Reprappers Sat, 29 Oct 2016 20:20:53 -0400 https://reprap.org/forum/read.php?4,718247,718247#msg-718247 Titan Pancake Stepper not working https://reprap.org/forum/read.php?4,718247,718247#msg-718247 Running Duet Wifi at 24v power

This is the model of stepper im using its a small nema 17
[www.motors-biz.com]

I triple checked the wiring and the left two wires on the connector are for one coil and the right two wires are for the other coil
currently when i try and drive the motor it vibrates and get very hot

I have also tried switching one coil pair incase they are fighting each other

max Current Phase is 0.8A

I have tried with800,and 600Mah with no difference it just shakes
I cant get this thing to turn properly
it moves easily by hand

other code i use related to this motor

M569 P3 S0 ; Drive E3D Titan goes backwards
M350 E16 I0 ; Configure microstepping without interpolation
M350 X16 Y16 Z16 I1 ; Configure microstepping with interpolation
M92 X200 Y200 Z800 E418.5 ; Set steps per mm
M566 X900 Y900 Z12 E100 ; Set maximum instantaneous speed changes (mm/min)
M203 X9000 Y9000 Z360 E1800 ; Set maximum speeds (mm/min)
M201 X500 Y500 Z250 E250 ; Set accelerations (mm/s^2)
M906 X800 Y800 Z1200 E400 I10 ; Set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

Running 24v power]]> makerparts Reprappers Sat, 29 Oct 2016 18:26:46 -0400