(:D i want to help me hi i want to build printer 3d with lcd2004 kit and ramps 1.4 but when i install the frameware 10 it can't compile or sende to arduino it give me a lot of probleme like this ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Arduino : 1.8.2 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" In file included from sketch\Marlin.h:23:0, from sketch\thermistortables.h:4, from sketch\Configuration.h:724, from C:\Users\mohamed\Pictures\printer\Prusa-Firmware-3.0.10-RC1\Prusa-Firmware-3.0.10-RC1\Firmware\Firmware.ino:33: sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined #define X_MS1_PIN 40 ^ sketch\pins.h:7:0: note: this is the location of the previous definition #define X_MS1_PIN -1 ^ sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined #define X_MS2_PIN 41 ^ sketch\pins.h:8:0: note: this is the location of the previous definition #define X_MS2_PIN -1 ^ sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined #define Y_MS1_PIN 69 ^ sketch\pins.h:9:0: note: this is the location of the previous definition #define Y_MS1_PIN -1 ^ sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined #define Y_MS2_PIN 39 ^ sketch\pins.h:10:0: note: this is the location of the previous definition #define Y_MS2_PIN -1 ^ sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined #define Z_MS1_PIN 68 ^ sketch\pins.h:11:0: note: this is the location of the previous definition #define Z_MS1_PIN -1 ^ sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined #define Z_MS2_PIN 67 ^ sketch\pins.h:12:0: note: this is the location of the previous definition #define Z_MS2_PIN -1 ^ sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined #define E0_MS1_PIN 65 ^ sketch\pins.h:13:0: note: this is the location of the previous definition #define E0_MS1_PIN -1 ^ sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined #define E0_MS2_PIN 66 ^ sketch\pins.h:14:0: note: this is the location of the previous definition #define E0_MS2_PIN -1 ^ In file included from sketch\Marlin.h:23:0, from sketch\Marlin_main.cpp:38: sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined #define X_MS1_PIN 40 ^ sketch\pins.h:7:0: note: this is the location of the previous definition #define X_MS1_PIN -1 ^ sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined #define X_MS2_PIN 41 ^ sketch\pins.h:8:0: note: this is the location of the previous definition #define X_MS2_PIN -1 ^ sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined #define Y_MS1_PIN 69 ^ sketch\pins.h:9:0: note: this is the location of the previous definition #define Y_MS1_PIN -1 ^ sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined #define Y_MS2_PIN 39 ^ sketch\pins.h:10:0: note: this is the location of the previous definition #define Y_MS2_PIN -1 ^ sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined #define Z_MS1_PIN 68 ^ sketch\pins.h:11:0: note: this is the location of the previous definition #define Z_MS1_PIN -1 ^ sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined #define Z_MS2_PIN 67 ^ sketch\pins.h:12:0: note: this is the location of the previous definition #define Z_MS2_PIN -1 ^ sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined #define E0_MS1_PIN 65 ^ sketch\pins.h:13:0: note: this is the location of the previous definition #define E0_MS1_PIN -1 ^ sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined #define E0_MS2_PIN 66 ^ sketch\pins.h:14:0: note: this is the location of the previous definition #define E0_MS2_PIN -1 ^ In file included from sketch\SdFile.h:27:0, from sketch\cardreader.h:8, from sketch\Marlin_main.cpp:58: SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct' struct fpos_t { ^ In file included from sketch\Marlin.h:10:0, from sketch\Marlin_main.cpp:38: c:\program files\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here __extension__ typedef long long fpos_t; ^ exit status 1 using typedef-name 'fpos_t' after 'struct' Ce rapport pourrait être plus détaillé avec l'option "Afficher les résultats détaillés de la compilation" activée dans Fichier -> Préférences. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- please i want to solve this problem i want this version from prusa because it have a lot of setting and option thank you https://reprap.org/forum/read.php?4,758106,758106#msg-758106 Thu, 15 Oct 2026 10:28:46 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,758106,758401#msg-758401 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758401#msg-758401 it work but when i do any thing it give an crazy lcd it write outher symbol or place the text change






]]> ayoublaser Reprappers Sat, 25 Mar 2017 12:55:17 -0400 https://reprap.org/forum/read.php?4,758106,758302#msg-758302 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758302#msg-758302
You would need to write a new pins.h to match your board

Also note if your after the advanced features like software current limits for stepper drivers (quiet mode) are not possible on ramps (or any board with pololu type stepper modules)

Also the X Y Z auto calibration stuff in this firmware requires a mk42 bed that has extra fiducials in the board so the sensor can see it and correct for the alignment.]]> Dust Reprappers Fri, 24 Mar 2017 22:17:18 -0400 https://reprap.org/forum/read.php?4,758106,758208#msg-758208 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758208#msg-758208 i thing the variable when i compile it give me *#define X_MS1_PIN -1* a lot of there are defined
so what should i do]]> ayoublaser Reprappers Fri, 24 Mar 2017 10:53:20 -0400 https://reprap.org/forum/read.php?4,758106,758162#msg-758162 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758162#msg-758162
ie

in file SdBaseFile.h line 199 still says void SdBaseFile::getpos(fpos_t*)

and

SdBaseFile.h line 203 still says void SdBaseFile::setpos(fpos_t*)

Change those also.]]> Dust Reprappers Fri, 24 Mar 2017 06:53:56 -0400 https://reprap.org/forum/read.php?4,758106,758153#msg-758153 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758153#msg-758153 i have arduino 1.8.2 and board are mega 2560
are you have other why or frameware can be work good
thank you

+++++++++++++++++++++++++++++
Arduino : 1.8.2 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

In file included from sketch\Marlin.h:23:0,

from sketch\thermistortables.h:4,

from sketch\Configuration.h:724,

from C:\Users\mohamed\Pictures\printer\Prusa-Firmware-3.0.10-RC1\Prusa-Firmware-3.0.10-RC1\Firmware\Firmware.ino:33:

sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined

#define X_MS1_PIN 40

^

sketch\pins.h:7:0: note: this is the location of the previous definition

#define X_MS1_PIN -1

^

sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined

#define X_MS2_PIN 41

^

sketch\pins.h:8:0: note: this is the location of the previous definition

#define X_MS2_PIN -1

^

sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined

#define Y_MS1_PIN 69

^

sketch\pins.h:9:0: note: this is the location of the previous definition

#define Y_MS1_PIN -1

^

sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined

#define Y_MS2_PIN 39

^

sketch\pins.h:10:0: note: this is the location of the previous definition

#define Y_MS2_PIN -1

^

sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined

#define Z_MS1_PIN 68

^

sketch\pins.h:11:0: note: this is the location of the previous definition

#define Z_MS1_PIN -1

^

sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined

#define Z_MS2_PIN 67

^

sketch\pins.h:12:0: note: this is the location of the previous definition

#define Z_MS2_PIN -1

^

sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined

#define E0_MS1_PIN 65

^

sketch\pins.h:13:0: note: this is the location of the previous definition

#define E0_MS1_PIN -1

^

sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined

#define E0_MS2_PIN 66

^

sketch\pins.h:14:0: note: this is the location of the previous definition

#define E0_MS2_PIN -1

^

In file included from sketch\Marlin.h:23:0,

from sketch\SdBaseFile.cpp:21:

sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined

#define X_MS1_PIN 40

^

sketch\pins.h:7:0: note: this is the location of the previous definition

#define X_MS1_PIN -1

^

sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined

#define X_MS2_PIN 41

^

sketch\pins.h:8:0: note: this is the location of the previous definition

#define X_MS2_PIN -1

^

sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined

#define Y_MS1_PIN 69

^

sketch\pins.h:9:0: note: this is the location of the previous definition

#define Y_MS1_PIN -1

^

sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined

#define Y_MS2_PIN 39

^

sketch\pins.h:10:0: note: this is the location of the previous definition

#define Y_MS2_PIN -1

^

sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined

#define Z_MS1_PIN 68

^

sketch\pins.h:11:0: note: this is the location of the previous definition

#define Z_MS1_PIN -1

^

sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined

#define Z_MS2_PIN 67

^

sketch\pins.h:12:0: note: this is the location of the previous definition

#define Z_MS2_PIN -1

^

sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined

#define E0_MS1_PIN 65

^

sketch\pins.h:13:0: note: this is the location of the previous definition

#define E0_MS1_PIN -1

^

sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined

#define E0_MS2_PIN 66

^

sketch\pins.h:14:0: note: this is the location of the previous definition

#define E0_MS2_PIN -1

^

SdBaseFile.cpp:297: error: prototype for 'void SdBaseFile::getpos(filepos_t*)' does not match any in class 'SdBaseFile'

void SdBaseFile::getpos(filepos_t* pos) {

^

In file included from sketch\SdBaseFile.cpp:24:0:

SdBaseFile.h:199: error: candidate is: void SdBaseFile::getpos(fpos_t*)

void getpos(fpos_t* pos);

^

SdBaseFile.cpp:1495: error: prototype for 'void SdBaseFile::setpos(filepos_t*)' does not match any in class 'SdBaseFile'

void SdBaseFile::setpos(filepos_t* pos) {

^

In file included from sketch\SdBaseFile.cpp:24:0:

SdBaseFile.h:203: error: candidate is: void SdBaseFile::setpos(fpos_t*)

void setpos(fpos_t* pos);

^

exit status 1
prototype for 'void SdBaseFile::getpos(filepos_t*)' does not match any in class 'SdBaseFile'

Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++]]> ayoublaser Reprappers Fri, 24 Mar 2017 05:40:39 -0400 https://reprap.org/forum/read.php?4,758106,758112#msg-758112 Re: (:D i want to help me https://reprap.org/forum/read.php?4,758106,758112#msg-758112
or edit the code

This issue is that the keyword "fpos_t" was not used in the older versions but became a reserved word in the new versions of arduino ide

so either use a older version of the arduino ide, or find a the references to "fpos_t" and change it to "filepos_t"

Also if your compiling for a Rambo board you need to install the rambo plug in. and use the rambo board, not the mega2560 board.
see [reprap.org]
the atmel2560 chip has more usable pins than are broken out on a mega board. But they are used on a Rambo board. So you really need to use the rambo plugin to use those pins. (lcd is the main thing on these pins)]]> Dust Reprappers Thu, 23 Mar 2017 21:18:20 -0400 https://reprap.org/forum/read.php?4,758106,758106#msg-758106 (:D i want to help me https://reprap.org/forum/read.php?4,758106,758106#msg-758106 i want to build printer 3d with lcd2004 kit and ramps 1.4
but when i install the frameware 10 it can't compile or sende to arduino it give me a lot of probleme like this

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Arduino : 1.8.2 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

In file included from sketch\Marlin.h:23:0,

from sketch\thermistortables.h:4,

from sketch\Configuration.h:724,

from C:\Users\mohamed\Pictures\printer\Prusa-Firmware-3.0.10-RC1\Prusa-Firmware-3.0.10-RC1\Firmware\Firmware.ino:33:

sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined

#define X_MS1_PIN 40

^

sketch\pins.h:7:0: note: this is the location of the previous definition

#define X_MS1_PIN -1

^

sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined

#define X_MS2_PIN 41

^

sketch\pins.h:8:0: note: this is the location of the previous definition

#define X_MS2_PIN -1

^

sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined

#define Y_MS1_PIN 69

^

sketch\pins.h:9:0: note: this is the location of the previous definition

#define Y_MS1_PIN -1

^

sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined

#define Y_MS2_PIN 39

^

sketch\pins.h:10:0: note: this is the location of the previous definition

#define Y_MS2_PIN -1

^

sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined

#define Z_MS1_PIN 68

^

sketch\pins.h:11:0: note: this is the location of the previous definition

#define Z_MS1_PIN -1

^

sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined

#define Z_MS2_PIN 67

^

sketch\pins.h:12:0: note: this is the location of the previous definition

#define Z_MS2_PIN -1

^

sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined

#define E0_MS1_PIN 65

^

sketch\pins.h:13:0: note: this is the location of the previous definition

#define E0_MS1_PIN -1

^

sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined

#define E0_MS2_PIN 66

^

sketch\pins.h:14:0: note: this is the location of the previous definition

#define E0_MS2_PIN -1

^

In file included from sketch\Marlin.h:23:0,

from sketch\Marlin_main.cpp:38:

sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined

#define X_MS1_PIN 40

^

sketch\pins.h:7:0: note: this is the location of the previous definition

#define X_MS1_PIN -1

^

sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined

#define X_MS2_PIN 41

^

sketch\pins.h:8:0: note: this is the location of the previous definition

#define X_MS2_PIN -1

^

sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined

#define Y_MS1_PIN 69

^

sketch\pins.h:9:0: note: this is the location of the previous definition

#define Y_MS1_PIN -1

^

sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined

#define Y_MS2_PIN 39

^

sketch\pins.h:10:0: note: this is the location of the previous definition

#define Y_MS2_PIN -1

^

sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined

#define Z_MS1_PIN 68

^

sketch\pins.h:11:0: note: this is the location of the previous definition

#define Z_MS1_PIN -1

^

sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined

#define Z_MS2_PIN 67

^

sketch\pins.h:12:0: note: this is the location of the previous definition

#define Z_MS2_PIN -1

^

sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined

#define E0_MS1_PIN 65

^

sketch\pins.h:13:0: note: this is the location of the previous definition

#define E0_MS1_PIN -1

^

sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined

#define E0_MS2_PIN 66

^

sketch\pins.h:14:0: note: this is the location of the previous definition

#define E0_MS2_PIN -1

^

In file included from sketch\SdFile.h:27:0,

from sketch\cardreader.h:8,

from sketch\Marlin_main.cpp:58:

SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'

struct fpos_t {

^

In file included from sketch\Marlin.h:10:0,

from sketch\Marlin_main.cpp:38:

c:\program files\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

__extension__ typedef long long fpos_t;

^

exit status 1
using typedef-name 'fpos_t' after 'struct'

Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
please i want to solve this problem
i want this version from prusa because it have a lot of setting and option
thank you]]> ayoublaser Reprappers Thu, 23 Mar 2017 19:41:55 -0400