Hello, So Ive recently built my machine, and used up one spool of filament tuning it. then I've bought the same colored PLA from the same supplier, and the same brand. aand now my prints get some really under extruded layers every 10 or 20 layers. I've been trying to lower the layer height, then increase the extrusion multiplier, but nothing seems to work. Any ideas? https://reprap.org/forum/read.php?4,791917,791917#msg-791917 Sun, 15 Mar 2026 14:15:55 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?4,791917,792156#msg-792156 https://reprap.org/forum/read.php?4,791917,792156#msg-792156 number40fan Reprappers Fri, 13 Oct 2017 12:16:39 -0400 https://reprap.org/forum/read.php?4,791917,792113#msg-792113 https://reprap.org/forum/read.php?4,791917,792113#msg-792113 Karzin Reprappers Fri, 13 Oct 2017 05:24:13 -0400 https://reprap.org/forum/read.php?4,791917,791926#msg-791926 https://reprap.org/forum/read.php?4,791917,791926#msg-791926 I have many spools and they are all a little different. It doesn't take much to not be right anymore]]> Floyd Reprappers Wed, 11 Oct 2017 15:10:32 -0400 https://reprap.org/forum/read.php?4,791917,791917#msg-791917 https://reprap.org/forum/read.php?4,791917,791917#msg-791917
then I've bought the same colored PLA from the same supplier, and the same brand. aand now my prints get some really under extruded layers every 10 or 20 layers.

I've been trying to lower the layer height, then increase the extrusion multiplier, but nothing seems to work.

Any ideas?]]> Karzin Reprappers Wed, 11 Oct 2017 13:36:50 -0400