Hello, I am new to 3D Printers and just built an i3 kit from eBay. After wiring everything together I realized that the pinout of one of the Z-axis motors was wrong so i fixed that. Upon completion i get an error code of M999 ib repeater. The motors will home, but I have no other control, I believe it has to do with the thermoresistors. The bed temp shows up. But the extruder temp is always at 363 C even when its unplugged. Could there be a short somewhere in the system? https://reprap.org/forum/read.php?406,614432,614432#msg-614432 Tue, 15 Sep 2026 20:15:07 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?406,614432,615154#msg-615154 https://reprap.org/forum/read.php?406,614432,615154#msg-615154 dlvandewiele Prusa i3 and variants Mon, 25 Jan 2016 00:08:27 -0500 https://reprap.org/forum/read.php?406,614432,614657#msg-614657 https://reprap.org/forum/read.php?406,614432,614657#msg-614657 Roger123D Prusa i3 and variants Sat, 23 Jan 2016 22:03:41 -0500 https://reprap.org/forum/read.php?406,614432,614432#msg-614432 https://reprap.org/forum/read.php?406,614432,614432#msg-614432 dlvandewiele Prusa i3 and variants Sat, 23 Jan 2016 11:58:42 -0500