Just did a print, the x axis moves , but the print was only 30% it cut off most of the print, but cura said 100% complete. What happened. https://reprap.org/forum/read.php?406,678155,678155#msg-678155 Wed, 11 Mar 2026 03:34:39 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?406,678155,689670#msg-689670 https://reprap.org/forum/read.php?406,678155,689670#msg-689670 blt3dp Prusa i3 and variants Mon, 18 Jul 2016 11:43:35 -0400 https://reprap.org/forum/read.php?406,678155,686867#msg-686867 https://reprap.org/forum/read.php?406,678155,686867#msg-686867 ggherbaz Prusa i3 and variants Thu, 14 Jul 2016 21:03:43 -0400 https://reprap.org/forum/read.php?406,678155,683058#msg-683058 https://reprap.org/forum/read.php?406,678155,683058#msg-683058 Taw1985 Prusa i3 and variants Thu, 30 Jun 2016 16:03:13 -0400 https://reprap.org/forum/read.php?406,678155,682716#msg-682716 https://reprap.org/forum/read.php?406,678155,682716#msg-682716 It will turn the steppers "ON" and holds position after all axis find their home. (For a minute or two anyway)]]> Veesta Prusa i3 and variants Wed, 29 Jun 2016 17:01:57 -0400 https://reprap.org/forum/read.php?406,678155,682692#msg-682692 https://reprap.org/forum/read.php?406,678155,682692#msg-682692
During heat up, the steppers aren't on, so yes, it's not holding position. Activate steppers and it holds firm.
So, need to move z a mm to activate stepper.

Must be another way to switch on steppers? It's not connected to a pc, and the LCD just has option to turn steppers off, not on.]]> Phytone Prusa i3 and variants Wed, 29 Jun 2016 16:12:31 -0400 https://reprap.org/forum/read.php?406,678155,682673#msg-682673 https://reprap.org/forum/read.php?406,678155,682673#msg-682673
Or your extruder or hotend might have failed?]]> ggherbaz Prusa i3 and variants Wed, 29 Jun 2016 14:54:44 -0400 https://reprap.org/forum/read.php?406,678155,678155#msg-678155 https://reprap.org/forum/read.php?406,678155,678155#msg-678155 Taw1985 Prusa i3 and variants Sat, 25 Jun 2016 20:04:20 -0400