Hi Guys. Im new to all this 3D stuff. What am I doing wrong I printed this yesterday and it's not good. https://reprap.org/forum/read.php?406,758516,758516#msg-758516 Mon, 16 Mar 2026 01:01:27 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?406,758516,759824#msg-759824 https://reprap.org/forum/read.php?406,758516,759824#msg-759824 Bee69 Prusa i3 and variants Sat, 01 Apr 2017 02:14:59 -0400 https://reprap.org/forum/read.php?406,758516,759806#msg-759806 https://reprap.org/forum/read.php?406,758516,759806#msg-759806 imgur.com]

Click 'configuration' in the first picture.

Then find your settings at the bottom of the screen that pops up, under the heading 'Selected Quality Setting'.

And since you seem to have a camera, how 'bout snapping a few picks of your badboy and setup? You never know what people may see.]]> VonRansak Prusa i3 and variants Fri, 31 Mar 2017 23:07:51 -0400 https://reprap.org/forum/read.php?406,758516,759776#msg-759776 https://reprap.org/forum/read.php?406,758516,759776#msg-759776 Bee69 Prusa i3 and variants Fri, 31 Mar 2017 16:26:44 -0400 https://reprap.org/forum/read.php?406,758516,759775#msg-759775 https://reprap.org/forum/read.php?406,758516,759775#msg-759775
I will pull out my Cura settings tomorrow.
Bit tired on Friday night. :)]]> SatorCodex Prusa i3 and variants Fri, 31 Mar 2017 16:26:03 -0400 https://reprap.org/forum/read.php?406,758516,759344#msg-759344 https://reprap.org/forum/read.php?406,758516,759344#msg-759344 I'm using Cura 2.4.0 Beta2 yes the settings are under the settings heading. lol
Yes im using masking tape. It came with blue masking tape on it.
Thank you
Adrian]]> Bee69 Prusa i3 and variants Thu, 30 Mar 2017 02:26:35 -0400 https://reprap.org/forum/read.php?406,758516,759294#msg-759294 https://reprap.org/forum/read.php?406,758516,759294#msg-759294
I can see that the print in the picture has warped upwards.
Do you have painters masking tape on the bed. Or what is the print sticking to on the bed?
Does you're fan work, thats cools the print around the nozzle?
For PLA, its best to habit to full. or almost full effect.

Thing is. if it warps. The nozzle will drag the tip in the print.

If you find the settings in Cura. I will help you adjust them to what I think is basic settings for this kind of printer.
But printers are individuals. so it might need more fine tweaking.]]> SatorCodex Prusa i3 and variants Wed, 29 Mar 2017 17:23:40 -0400 https://reprap.org/forum/read.php?406,758516,759238#msg-759238 https://reprap.org/forum/read.php?406,758516,759238#msg-759238 Accel - 1400
VXY Jerk - 13
VZ - 000.3
VE - 5
Vmax - X - 400
Vmax - Y - 400
Vmax - Z - 2
Vmax - E - 40
Vmin - 0
Vtrav mm - 0
Amax - X - 1400
Amax - Y - 1400
Amax - Z - 100
Amax - E - 8000
A retract - 5000
Xstep - +078.74
Ystep - +078.74
Zstep - +2560.0
Estep - +0105.0
Thanks
Adrian]]> Bee69 Prusa i3 and variants Wed, 29 Mar 2017 13:05:32 -0400 https://reprap.org/forum/read.php?406,758516,759090#msg-759090 https://reprap.org/forum/read.php?406,758516,759090#msg-759090 Thanks
Adrian]]> Bee69 Prusa i3 and variants Wed, 29 Mar 2017 00:37:45 -0400 https://reprap.org/forum/read.php?406,758516,759050#msg-759050 https://reprap.org/forum/read.php?406,758516,759050#msg-759050 Layerhight, speed and retraction distance is found in the slicer program.
What slicer are you using?

Btw.
Im fairly new to this too.
Ive learned alot on this forum so far. Just glad to be able to help some one!

Tip!
There is alot of info Regarding printers and settings on youtube!
Search youre printer ther. Im sure you will find alot of info.]]> SatorCodex Prusa i3 and variants Tue, 28 Mar 2017 17:31:17 -0400 https://reprap.org/forum/read.php?406,758516,759047#msg-759047 https://reprap.org/forum/read.php?406,758516,759047#msg-759047 Layer hight is how much the nozzle moves up per printed layer. If you get what I mean?
0.4mm nozzle. Normalt you print with 0.2mm layerhight.
Think about a big stack of pancakes! Mm very single pankacke is a layer of pancake! (Now I got hungry!
Printer speed is the speed the nozzle travels in x and y axis. Z i movement in hight.. ex z moves nozzle up 0.2mm per layer.

Retraction is what its sounds like.
When the filament is fred tru the nozzle during print. It is some pressure in the nozzle. When the nozzle moves to another place to print. (While printing a layer)
it has to stop. Bit the overpressure in the nozzle will push out some extra filament. For example PLA.
To stop the happening. The feeder motor retrackts some filament. In other words. Backsit out from the nozzle. Since it is soft. Its more like creating a sshort period of suction.
Try to hold the filament between the fingers, during a print. Shou should feel the filament go backwards once in a while.

Overextrution is if the nozzle feeds out to much filament during printing. You get to much of the good stuff!
Underextrution is the opposite!
That can be calibrated. The stepper motor that feeds the filament needs calibration. Its usally named E-motor. (Extruder)
You might be able to adjust E-motor in the printers menu?]]> SatorCodex Prusa i3 and variants Tue, 28 Mar 2017 17:24:35 -0400 https://reprap.org/forum/read.php?406,758516,758996#msg-758996 https://reprap.org/forum/read.php?406,758516,758996#msg-758996 How do I find the layer height, printing speed and retraction distance.
Sorry but Im a complete newby at this.
Adrian]]> Bee69 Prusa i3 and variants Tue, 28 Mar 2017 13:04:19 -0400 https://reprap.org/forum/read.php?406,758516,758977#msg-758977 https://reprap.org/forum/read.php?406,758516,758977#msg-758977
What's your layer height, printing speed and retraction distance.]]> ggherbaz Prusa i3 and variants Tue, 28 Mar 2017 11:24:59 -0400 https://reprap.org/forum/read.php?406,758516,758903#msg-758903 https://reprap.org/forum/read.php?406,758516,758903#msg-758903 Sorry I didn't state it the printer is a CTC Prusa i3 copy off ebay.
It's a DIY printer that comes in 5 parts.
The filament is PLA.
The nozle is .04 Diameter temp was 189 and the bed temp was 60.
As I've said I'm new to all this.
I have no clue about calibration of the extruder and the pulley diameter and the rest of the stuff the calculator need's to know.
Thank you all
Adrian]]> Bee69 Prusa i3 and variants Tue, 28 Mar 2017 04:59:25 -0400 https://reprap.org/forum/read.php?406,758516,758862#msg-758862 https://reprap.org/forum/read.php?406,758516,758862#msg-758862
I would go through a calibration again, then get comfortable printing with PLA before trying ABS.
When printing with PLA use a cooling fan for the piece. I don't use a cooling fan for ABS.]]> SteveRoy Prusa i3 and variants Tue, 28 Mar 2017 00:14:17 -0400 https://reprap.org/forum/read.php?406,758516,758848#msg-758848 https://reprap.org/forum/read.php?406,758516,758848#msg-758848
Over extrusion.
Probably too hot.
Retraction settings too small.
Wobbly Z axis.

Now can you give me some more info like:

Printer style, model, it came assembled or you put it together? Type of filament, temperatures of both hotend and bed, slicer settings including layer height, nozzle size, speed. But most importantly, did you calibrate your printer on all axis including extruder?

There is no magical solutions for your print, it's just setting your printer right and then pretty much trial and error which settings works best for the printer and the filament used.]]> ggherbaz Prusa i3 and variants Mon, 27 Mar 2017 20:51:35 -0400 https://reprap.org/forum/read.php?406,758516,758847#msg-758847 https://reprap.org/forum/read.php?406,758516,758847#msg-758847
Here is a link for the gold standard extruder calibration procedure
Triffid Hunter Calibration guide]]> n9jcv Prusa i3 and variants Mon, 27 Mar 2017 20:46:56 -0400 https://reprap.org/forum/read.php?406,758516,758803#msg-758803 https://reprap.org/forum/read.php?406,758516,758803#msg-758803 Thank you
Adrian]]> Bee69 Prusa i3 and variants Mon, 27 Mar 2017 15:32:35 -0400 https://reprap.org/forum/read.php?406,758516,758516#msg-758516 https://reprap.org/forum/read.php?406,758516,758516#msg-758516 Im new to all this 3D stuff.
What am I doing wrong I printed this yesterday and it's not good.





]]> Bee69 Prusa i3 and variants Sun, 26 Mar 2017 07:38:24 -0400