Info about real Manual Bed Leveling

Re: Info about real Manual Bed Leveling

yucelll — Thu, 15 Nov 2018 16:54:49 -0500

Quote
brunosso

IMG_20180404_225845.jpg

Finally i done the mod!!!
Thank you very much!
I want to ask you if the custom_status_screen is only available in the bugfix version of Marlin?

can you shared your statusscren.h file code ?

Re: Info about real Manual Bed Leveling

brunosso — Fri, 06 Apr 2018 11:58:03 -0400

Quote
Roxy
It should be available in all current branches.

in the [github.com] branches 1.1.x there is no

#define CUSTOM_STATUS_SCREEN_IMAGE

in the Configuration.h

Re: Info about real Manual Bed Leveling

Roxy — Fri, 06 Apr 2018 11:44:51 -0400

It should be available in all current branches.

Re: Info about real Manual Bed Leveling

brunosso — Fri, 06 Apr 2018 04:11:01 -0400

IMG_20180404_225845.jpg

Finally i done the mod!!!
Thank you very much!
I want to ask you if the custom_status_screen is only available in the bugfix version of Marlin?

Re: Info about real Manual Bed Leveling

Thinkyhead — Thu, 05 Apr 2018 18:11:04 -0400

> i can extend to 25-26 pixel and the rest of the code (i mean the actual temperature of hotend or bed) doesn't affect!?

It should work okay. The bitmap is drawn before the other info is rendered. And in the future we want to make it draw only once, when first showing the Info screen, then only draw the fan animation by itself after that.

Re: Info about real Manual Bed Leveling

brunosso — Tue, 03 Apr 2018 02:42:30 -0400

Quote
Thinkyhead
Currently the entire header is all one bitmap image (for optimization), so just note that if you want to extend the image into that area it means the whole bitmap will be 5-6 lines taller. Marlin will allow this. Just drop your image into the form at [marlinfw.org] and select "Status" to get the needed code snippet.

Actually the in the Statusscreen.h code the bmp have an height of 19 pixel.. i can extend to 25-26 pixel and the rest of the code (i mean the actual temperature of hotend or bed) doesn't affect!?

Re: Info about real Manual Bed Leveling

Thinkyhead — Sun, 01 Apr 2018 19:40:25 -0400

Currently the entire header is all one bitmap image (for optimization), so just note that if you want to extend the image into that area it means the whole bitmap will be 5-6 lines taller. Marlin will allow this. Just drop your image into the form at [marlinfw.org] and select "Status" to get the needed code snippet.

Re: Info about real Manual Bed Leveling

Roxy — Fri, 30 Mar 2018 19:07:34 -0400

You should be able to draw on the indicated area when the screen is in an idle or status mode. But various menu screens are going to use that area. What are you thinking about displaying there?

Re: Info about real Manual Bed Leveling

brunosso — Thu, 29 Mar 2018 01:15:28 -0400

Quote
Thinkyhead
The option you're looking for is called LEVEL_BED_CORNERS.

Thank you very much!!!

I want to ask another question.. reply if you want!

The CUSTOM_STATUS_SCREEN_IMAGE is available only in bugfix version of firmware!? And is possible to use this area marked in red? If so, which file i need to edit?!

www.hostpic.org

Thank you very much for your work!!!

Re: Info about real Manual Bed Leveling

Thinkyhead — Wed, 28 Mar 2018 21:06:00 -0400

The option you're looking for is called LEVEL_BED_CORNERS.

Info about real Manual Bed Leveling

brunosso — Tue, 27 Mar 2018 09:48:47 -0400

Hi! I want to ask if is possible to activate a sort of manual bed leveling feature. I want a tool like mesh_bed_leveling with LCD_bed_leveling but instead of move Z offset for each point wait me to adjust the screw under the bed to level correctly. Like many software onboard shipped with 3d printer