Delay between each probe point - Bed leveling Hello all, I have a quick question regarding the bed leveling, specifically I am using unified bed leveling. When I run a G29 to get distance measurements, my printer does a 2-second delay between each probe. For example. It goes to point A and measures, then stops for 2 seconds and goes to point B and so on. Is there any way to reduce this delay? I could not find the settings anywhere in Marlin. Here are my probe settings on Marling: #define X_PROBE_OFFSET_FROM_EXTRUDER +65 #define Y_PROBE_OFFSET_FROM_EXTRUDER -15 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 #define XY_PROBE_SPEED 8000 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define MULTIPLE_PROBING 3 #define Z_CLEARANCE_DEPLOY_PROBE 5 #define Z_CLEARANCE_BETWEEN_PROBES 5 // Homing speeds (mm/m) #define HOMING_FEEDRATE_XY (3000) #define HOMING_FEEDRATE_Z (800) Thank you in advance https://reprap.org/forum/read.php?415,849134,849134#msg-849134 Fri, 14 Aug 2026 02:55:26 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?415,849134,849134#msg-849134 Delay between each probe point - Bed leveling https://reprap.org/forum/read.php?415,849134,849134#msg-849134
I have a quick question regarding the bed leveling, specifically I am using unified bed leveling. When I run a G29 to get distance measurements, my printer does a 2-second delay between each probe. For example. It goes to point A and measures, then stops for 2 seconds and goes to point B and so on. Is there any way to reduce this delay? I could not find the settings anywhere in Marlin.

Here are my probe settings on Marling:

#define X_PROBE_OFFSET_FROM_EXTRUDER +65
#define Y_PROBE_OFFSET_FROM_EXTRUDER -15
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0

#define XY_PROBE_SPEED 8000

#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z

#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)

#define MULTIPLE_PROBING 3

#define Z_CLEARANCE_DEPLOY_PROBE 5
#define Z_CLEARANCE_BETWEEN_PROBES 5

// Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (3000)
#define HOMING_FEEDRATE_Z (800)

Thank you in advance]]> devilmostwanted Firmware - Marlin Thu, 14 Mar 2019 00:46:30 -0400