Hello friends! I updated the firmware from Marlin-2.1.2.1 to Marlin-2.1.2.4 After the update, the printer stopped automatically starting printing after sending the file from Cure via WiFi, although the Cue has a check mark "start printing after the transfer is completed" The printer screen lights up that the sending is completed, and "OK". In this case, the file appears on the flash drive and you can start printing it manually. What should I fix so that printing starts automatically after transferring the file? board RAMPS_14 https://reprap.org/forum/read.php?415,896135,896135#msg-896135 Fri, 14 Aug 2026 02:30:45 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?415,896135,896135#msg-896135 https://reprap.org/forum/read.php?415,896135,896135#msg-896135 I updated the firmware from Marlin-2.1.2.1 to Marlin-2.1.2.4
After the update, the printer stopped automatically starting printing after sending the file from Cure via WiFi, although the Cue has a check mark "start printing after the transfer is completed"
The printer screen lights up that the sending is completed, and "OK". In this case, the file appears on the flash drive and you can start printing it manually.
What should I fix so that printing starts automatically after transferring the file?
board RAMPS_14]]> DoctorDeath Firmware - Marlin Mon, 18 Nov 2024 06:17:47 -0500