Hello fellow reprappers, I have got a few issues with my a hybrid version of hangrinter that I am building currently. My new hybrid printer is built exactly how the original V3 is but with a few changes which include using a recyclebot nstead of a regular extruder and using a nema23 to support the D-lines where the weight of carriage is acting directly. The issue I have here is with the movement control of the printer, I could move it vertically with D-Line but the A, B and C lines are not able to support the horizontal movement correctly. I am using the software "Pronterface" to control the printer along with a TB6600 controller for the nema 23 whereas the rest of nema17s went with A4988 drivers. Thanks in advance for the assistance that I am gonna get here. https://reprap.org/forum/read.php?423,873277,873277#msg-873277 Mon, 14 Sep 2026 13:58:13 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?423,873277,885272#msg-885272 https://reprap.org/forum/read.php?423,873277,885272#msg-885272 I'm guessing that you don't do auto anchor calibration of any sort?
If not, then you'll have to measure anchor positions manually.
It's a bit involved, but not impossible.
Here's a nice discussion:
[gitlab.com]

Sorry for this answer being so late. Since the Discord server became more active, I've tended to check this forum less often.]]> tobben Hangprinter Mon, 02 Aug 2021 07:13:36 -0400 https://reprap.org/forum/read.php?423,873277,873277#msg-873277 https://reprap.org/forum/read.php?423,873277,873277#msg-873277 I have got a few issues with my a hybrid version of hangrinter that I am building currently.
My new hybrid printer is built exactly how the original V3 is but with a few changes which include using a recyclebot nstead of a regular extruder and using a nema23 to support the D-lines where the weight of carriage is acting directly.
The issue I have here is with the movement control of the printer, I could move it vertically with D-Line but the A, B and C lines are not able to support the horizontal movement correctly. I am using the software "Pronterface" to control the printer along with a TB6600 controller for the nema 23 whereas the rest of nema17s went with A4988 drivers.
Thanks in advance for the assistance that I am gonna get here.]]> bharathlavu Hangprinter Mon, 01 Jun 2020 13:55:29 -0400