This is my first time trying my hand with Aluminium profiles to create something myself. I require advice on choosing the right profile. Some suggestions / recommendations would also be great. Here is what I am trying to build. An AV Rack for 1 Receiver, 2 Amplifiers and 1 Center speaker (See Attached image). Here are some of the details. Dimensions: Pt -> Profile Thickness 6 Columns -> 18" / each 6 Side Beams -> 20" - (2 x Pt) = About 19.5" / each 5 Front Beams - > (48" - (3 x Pt)) / 2 = About 23.5" / Each 5 Back Beams - > (48" - (3 x Pt)) / 2 = About 23.5" / Each Loads 1 Receiver 15 Kg 2 Amplifiers 5 Kg / each 1 Center speaker 10 Kg These Loads will mostly be placed on wooden panels, which will be loaded onto the appropriate beams. For the connections, I intend to use, Angle Brackets + Inside Corner connectors. The Beams loaded onto the columns using the Angle brackets. The beams side by side to each other, possibly connected using Inside corner connectors (Something like the pic here). What profile would I need? Would a 2020 Medium T-Profile suffice? https://reprap.org/forum/read.php?88,858418,858418#msg-858418 Thu, 05 Mar 2026 12:58:56 -0500 Phorum 5.2.23 https://reprap.org/forum/read.php?88,858418,867850#msg-867850 https://reprap.org/forum/read.php?88,858418,867850#msg-867850 MechaBits Let's design something! (I've got an idea ...) Thu, 20 Feb 2020 18:15:53 -0500 https://reprap.org/forum/read.php?88,858418,867761#msg-867761 https://reprap.org/forum/read.php?88,858418,867761#msg-867761 www.aluminiumwarehouse.co.uk]. Square section tube with plastic connectors. It comes under various brands, not just the one I listed, and is available in most parts of the world. It's quick and easy to work with, and the tubing is available in a variety of colours which might be more aesthetically pleasing than the slotted profiles that we use for 3D printing. I recently made a pull out filaments storage rack which will take 32 x 1Kg reels of filament so I think it would handle your masses with ease. [somei3deas.wordpress.com]]]> deckingman Let's design something! (I've got an idea ...) Tue, 18 Feb 2020 09:04:41 -0500 https://reprap.org/forum/read.php?88,858418,858418#msg-858418 https://reprap.org/forum/read.php?88,858418,858418#msg-858418
Here is what I am trying to build. An AV Rack for 1 Receiver, 2 Amplifiers and 1 Center speaker (See Attached image). Here are some of the details.

Dimensions:
Pt -> Profile Thickness
6 Columns -> 18" / each
6 Side Beams -> 20" - (2 x Pt) = About 19.5" / each
5 Front Beams - > (48" - (3 x Pt)) / 2 = About 23.5" / Each
5 Back Beams - > (48" - (3 x Pt)) / 2 = About 23.5" / Each

Loads
1 Receiver 15 Kg
2 Amplifiers 5 Kg / each
1 Center speaker 10 Kg

These Loads will mostly be placed on wooden panels, which will be loaded onto the appropriate beams.

For the connections, I intend to use, Angle Brackets + Inside Corner connectors.
The Beams loaded onto the columns using the Angle brackets.
The beams side by side to each other, possibly connected using Inside corner connectors (Something like the pic here).

What profile would I need?
Would a 2020 Medium T-Profile suffice?]]> ShaQBlogs Let's design something! (I've got an idea ...) Thu, 22 Aug 2019 16:08:04 -0400