[INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! We appeared to be quiet for a while because we were working hard in the background to develop the MendelMax 1.5 kit. Finally, it is available on our eBay store [url=http://stores.ebay.com/Blomker-Industries]http://stores.ebay.com/Blomker-Industries[/url] [center][b]$699 ONLY!![color=#FF0000][/color][/b][/center] [img]http://i1061.photobucket.com/albums/t472/blomker/FullKit3.jpg[/img] Content of kit : MendelMax 1.5 Printed Plastic Parts Sanguinololu 1.3a + A4988 Stepstick Drivers MK2 Heat bed with Fiber Glass Insulated Wire NEMA17 Stepper Motors (40Oz/in) - 5pcs Aluminium shaft coupler for Z-Axis threaded rod - 2pcs 2020 Aluminium Extrusion (4pcs of 300mm,4pcs of 340mm,6pcs of 420mm) T5 Belt and Pulley for X & Y Axis SCV8UU Bearing Housing for Print Platform support - 4pcs LM8UU Bearing (8pcs) 608z Bearing (5pcs) MDF (9mm thickness) Print Platform J-Head MKV Hot End 8mm 304 Stainless Steel Smooth Rod for X, Y & Z Axis M8 threaded rod for Z Axis 12VDC, 20A Power Supply. 110V/240V Switchable Mechanical Endstop - 3pcs All bolts, nuts, wiring and miscellaneous [url=http://stores.ebay.com/Blomker-Industries]http://stores.ebay.com/Blomker-Industries[/url] http://www.blomker.com https://reprap.org/forum/read.php?94,154157,154157#msg-154157 Thu, 10 Sep 2026 12:59:38 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?94,154157,274218#msg-274218 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,274218#msg-274218 One of our MendelMax modified to Dual Extruder....





]]> blomker For Sale Sat, 30 Nov 2013 10:27:53 -0500 https://reprap.org/forum/read.php?94,154157,193766#msg-193766 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,193766#msg-193766
Researching a MendelMax build and I was just reading a little on some listing cost troubles your finding with eBay and stuff. If you find value by freely listing/showcasing your bots, parts, and filament on 3dhacker.com please email me your registered username from the site. (Takes about 2 minutes and I just need to take off the anti-spam verification on usernames to keep the site "clean".)

The site is searchable by country/state and might give more exposure to your RepRaps.

Just an idea,

Andrew
www.3dhacker.com]]> andrewupandabout For Sale Thu, 21 Mar 2013 20:49:43 -0400 https://reprap.org/forum/read.php?94,154157,190162#msg-190162 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,190162#msg-190162 I got a RAMPS setup so I am not going to need those. Very nice kit anyway.]]> glx51mm For Sale Wed, 06 Mar 2013 09:07:55 -0500 https://reprap.org/forum/read.php?94,154157,188927#msg-188927 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,188927#msg-188927 Knimrod For Sale Sat, 02 Mar 2013 10:36:32 -0500 https://reprap.org/forum/read.php?94,154157,188804#msg-188804 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,188804#msg-188804
I replaced the Wood bed support with a piece of G10, and am running a different main board that i had already. Other than that, it is pretty much stock. For the money this is a great kit. I've been printing with it for a few months now and have had no issues with the exception of the wood base.]]> RatInDaHat For Sale Fri, 01 Mar 2013 19:45:50 -0500 https://reprap.org/forum/read.php?94,154157,181841#msg-181841 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,181841#msg-181841 -------------------------------------------------------
> You can download his brochure and build
> instructions from the website. He provides all
> the settings for ABS and it does come with a
> heated bed so I'd say yes to ABS.

Good to know, thanks for the reply. The instructions appear to be well put together and very methodical. Can anyone offer an estimate to how long it would take for a 3D printer novice to build, program, and calibrate this kit? As a RC airplane/helicopter hobbyist, I do have experience building kits with moving parts, soldering, and working with electronics, so I can only assume these skills can translate to some extent. I'm looking for a kit that I can follow instructions, put together, go through the proper calibration procedures, and then start using it. I'd like the ability to tinker and expand upon later, but don't want something that I constantly need to maintain to keep working.]]> Zangetsu57 For Sale Mon, 04 Feb 2013 03:02:28 -0500 https://reprap.org/forum/read.php?94,154157,181822#msg-181822 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,181822#msg-181822 Knimrod For Sale Sun, 03 Feb 2013 23:52:31 -0500 https://reprap.org/forum/read.php?94,154157,181807#msg-181807 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,181807#msg-181807 -------------------------------------------------------
> Check out his website:
> [blomker.com]
>
> I ordered a kit from Blomker last week and
> supposed to be delivered tomorrow.

Thanks! I'm looking for a decent sub-$800 first 3D printer, and am debating between one of the RepRaps or the Solidoodle 2 pro. One of my hesitations with the Solidoodle 2 is I hear that filament jams at the extruder are very common and a pain to resolve. While I understand this will happen with any 3D printer, can anyone comment on the reliability of the MendelMax 1.5 if built correctly? Also, will this model at $699 work with ABS filament?]]> Zangetsu57 For Sale Sun, 03 Feb 2013 22:13:47 -0500 https://reprap.org/forum/read.php?94,154157,181794#msg-181794 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,181794#msg-181794 blomker.com]

I ordered a kit from Blomker last week and supposed to be delivered tomorrow.]]> Knimrod For Sale Sun, 03 Feb 2013 20:40:06 -0500 https://reprap.org/forum/read.php?94,154157,181765#msg-181765 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,181765#msg-181765 Zangetsu57 For Sale Sun, 03 Feb 2013 18:24:10 -0500 https://reprap.org/forum/read.php?94,154157,176500#msg-176500 Re: what doing first for initializer axes and software https://reprap.org/forum/read.php?94,154157,176500#msg-176500
I just finish to complete assembling of my MendelMax 1,5 and and ask me how to initiallised the differents axes first and
principaly the z axes for be sure that the extruder cone is in good place. (I suppose the small space of the thinkness from a paper folder between the cone and the surface of the glass upon the bed heater).
How to translate this situation to prontefact ? thanks for your aswer.
Excuse my bad English wrinting but I am Belgianpeople in french speaking.:)
Bernard PENDERS
Rocourt Belgium]]> bernard For Sale Sun, 13 Jan 2013 05:57:39 -0500 https://reprap.org/forum/read.php?94,154157,172806#msg-172806 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,172806#msg-172806 Do you ship with black printed parts?
Is the Sanguinololu in the kit an ATmega1284P one? I ask because I would like to add the LCD with SD to the setup for autonomous printing and the 644P is said to have to little memory for that.
Is such setup possible?

Thank you,
Andrej]]> drax For Sale Sun, 23 Dec 2012 09:52:21 -0500 https://reprap.org/forum/read.php?94,154157,172039#msg-172039 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,172039#msg-172039 Nil Einne For Sale Tue, 18 Dec 2012 08:44:02 -0500 https://reprap.org/forum/read.php?94,154157,171516#msg-171516 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,171516#msg-171516
I have viewed your website,it seems that there are none of the filament in sale.we are the manufacture in china,provide the ABS,PLA filament with 3mm,1.75mm.and so many color for your reference.

wish to cooperare with you in the future.

Barret]]> Barret For Sale Fri, 14 Dec 2012 23:46:57 -0500 https://reprap.org/forum/read.php?94,154157,171235#msg-171235 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,171235#msg-171235 http://www.thingiverse.com/thing:27062
Printed on our MendelMax :


]]> blomker For Sale Thu, 13 Dec 2012 10:59:08 -0500 https://reprap.org/forum/read.php?94,154157,169944#msg-169944 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,169944#msg-169944

]]> blomker For Sale Thu, 06 Dec 2012 03:01:56 -0500 https://reprap.org/forum/read.php?94,154157,168976#msg-168976 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,168976#msg-168976
Please e-mail me at blomker@blomker.com
I am sure something can be done to get the complete kit shipped to you in a box :)-D]]> blomker For Sale Fri, 30 Nov 2012 10:43:59 -0500 https://reprap.org/forum/read.php?94,154157,168896#msg-168896 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,168896#msg-168896 Is it possible to send the kit in two parts? The thing is i'm living in Ukraine and our customs system is a bit weird - if you order something for over 300 euros then you need to pay 40% tax, which in case of your kit would be 279 $. So the total amount will be 978$+shipping.

So can you divide the complete kit into two parts and sell each one for 350$?

Regards,
Vitaliy]]> begemotv For Sale Thu, 29 Nov 2012 20:28:49 -0500 https://reprap.org/forum/read.php?94,154157,168808#msg-168808 Re: what is the max printing area? https://reprap.org/forum/read.php?94,154157,168808#msg-168808 However, printing of PLA object does not require the heat bed and the print platform can be extended to a larger size.
Just relocate the limit switches and mount a larger piece of glass with some clips available from thingiverse.com

Probably I will post a guide on how to extend the print area for PLA printing.]]> blomker For Sale Thu, 29 Nov 2012 05:08:26 -0500 https://reprap.org/forum/read.php?94,154157,168807#msg-168807 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,168807#msg-168807
You will have to get the local glass shop to cut a 200x200x3mm glass to be used as print surface.
Cover the glass with Kapton tape for printing with PLA & ABS.
Or, just cover it with blue painters tape if you are printing with PLA only. Blue painters tape is also known as masking tape which is light brown in colour. I don't ship the glass because it will most likely break/crack during shipping.

Also, get a AC power cord which fits your AC wall outlet. I am not able to source for all the different AC power cord to be included in the kit.
Those are the two things you need. Everything else is included. :)

Regards,
Bayer]]> blomker For Sale Thu, 29 Nov 2012 05:05:17 -0500 https://reprap.org/forum/read.php?94,154157,163579#msg-163579 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,163579#msg-163579 I think about 10 days then we made the preorders :)]]> Benny For Sale Tue, 30 Oct 2012 20:14:13 -0400 https://reprap.org/forum/read.php?94,154157,162936#msg-162936 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,162936#msg-162936 Thanks!
Lee]]> Lee For Sale Fri, 26 Oct 2012 14:05:20 -0400 https://reprap.org/forum/read.php?94,154157,160670#msg-160670 what is the max printing area? https://reprap.org/forum/read.php?94,154157,160670#msg-160670
What is the max printing area?

Do I need to buy extra component in order to print a model (except ABS filament and my computer :) )? I found other 3D printer kit on ebay but they need to buy other components such as eletronics and motors.

Thanks,
Edward]]> ed For Sale Sun, 14 Oct 2012 15:41:13 -0400 https://reprap.org/forum/read.php?94,154157,160563#msg-160563 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,160563#msg-160563
Assembly is between easy to medium depending on individual's skill.
Minimal soldering is required.

You may refer to the build guide available at
http://blomker.com/BlomkerIndustries_MendelMax_BuildGuide.pdf to see how's the assembly like. I can guide you through if you face any problem.

E-mail me offline at blomker@blomker.com to discuss more.

Cheers]]> blomker For Sale Sun, 14 Oct 2012 02:05:27 -0400 https://reprap.org/forum/read.php?94,154157,160544#msg-160544 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,160544#msg-160544
I'm from malaysia.]]> DeadPie For Sale Sat, 13 Oct 2012 21:51:16 -0400 https://reprap.org/forum/read.php?94,154157,160465#msg-160465 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,160465#msg-160465 Once assembled I'll send some photos...]]> branko_nl For Sale Sat, 13 Oct 2012 10:51:15 -0400 https://reprap.org/forum/read.php?94,154157,160455#msg-160455 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,160455#msg-160455 I rather give buyers the 12% in a form of discount or freebies. Making RepRap affordable is the only way
for RepRap to keep growing in the open source space and slowly build an entry barrier for large organisations to
barge in. Once the big boys take over 3D Printing, we will be paying a fortune for the printers and consumables.

Saghir has got his kit and Branko's kit is the one on the left most below. Branko's kit will be picked up by Monday together with the other two.





International buyers please e-mail me directly at blomker@blomker.com
The website has Malaysian currency and it is for Malaysian order only. Trying to build up the Malaysian RepRap scene.
]]> blomker For Sale Sat, 13 Oct 2012 09:59:43 -0400 https://reprap.org/forum/read.php?94,154157,155993#msg-155993 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,155993#msg-155993 blomker.com] as well , but delivery country option is only to Malaysia ?
I'm in Netherlands.
Best,
Branko]]> branko_nl For Sale Sat, 22 Sep 2012 11:05:29 -0400 https://reprap.org/forum/read.php?94,154157,155326#msg-155326 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,155326#msg-155326 Saghir For Sale Wed, 19 Sep 2012 09:14:42 -0400 https://reprap.org/forum/read.php?94,154157,154359#msg-154359 Re: [INTERNATIONAL] MendelMax 1.5 Complete Kit at $699 ONLY!! https://reprap.org/forum/read.php?94,154157,154359#msg-154359 Electronics and wiring not done up yet in these pictures hence they are not visible.












]]> blomker For Sale Fri, 14 Sep 2012 07:43:10 -0400