Im putting my beloved 1st reprap up for sale it comes with 4 motors heatbed ramps and arduino ill chock in my old extruder with a pgl35 motor on it has for stepper drivers the z driver has two motors on it. no psu ill chuck in the jhead hotend its had alot of use out of it, i want quick sale so im looking for £50 plus £10 cover shipping due to weight grab a bargain the motors are 740z-inch heat bed is 12v you cant really buy new a good set of steppers for £40 so i think its very cheap to buy this for parts or spares or get it going it wont take much plus it has a lcd panel too check my undated blog in signature https://reprap.org/forum/read.php?94,692787,692787#msg-692787 Mon, 20 Apr 2026 15:11:10 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?94,692787,758011#msg-758011 https://reprap.org/forum/read.php?94,692787,758011#msg-758011 chris33 For Sale Thu, 23 Mar 2017 10:16:36 -0400 https://reprap.org/forum/read.php?94,692787,693882#msg-693882 https://reprap.org/forum/read.php?94,692787,693882#msg-693882
Part No.: 42BYGHW811
Frame Size: NEMA17
Step Angle: 1.8 degree
Voltage: 3.1V
Current: 2.5 A/phase
Resistance: 1.25Ohm/phase
Inductance: 1.8mH/phase
Holding torque: 70oz-in
Rotor inertia: 68g-cm2
Detent torque: 280g-cm
Number of wire leads: 4
Weight: 0.34 kg
Length: 48mm

they have wire extensions and connectors and heat shrink tube arround soldered joints none of the original wires to motors are cut

arduino mega but its a clone but works ok never had issue

4 drivers with ramps

a heatbed (12v)

lcd panel

frame

anything can be seperated]]> chris33 For Sale Tue, 02 Aug 2016 15:33:29 -0400 https://reprap.org/forum/read.php?94,692787,693191#msg-693191 https://reprap.org/forum/read.php?94,692787,693191#msg-693191 chris33 For Sale Mon, 01 Aug 2016 00:55:03 -0400 https://reprap.org/forum/read.php?94,692787,692787#msg-692787 https://reprap.org/forum/read.php?94,692787,692787#msg-692787



check my undated blog in signature]]> chris33 For Sale Sat, 30 Jul 2016 07:18:16 -0400