Hi everyone, I'm trying to get into the Reprap world, but I'm tight on cash as we all are. So I wanted to get one of each of the printed parts for Mendel and then I would use those as a guide for making the rest I need. I was thinking that about $100USD plus shipping would be good sense I've seen complete sets going on eBay for about $200, but you tell me what you think is fair and we'll see if we can agree on something. You would be shipping to Ogden, Utah (USA), so I would prefer someone local if possible, but I'll take what I can get, so I am willing to pay international shipping if necessary. This is the list of printed parts as I understand it. If this is worng, I would appreciate being corrected. bed-height-spacer-31mm_1off bed-spring_4off belt-split-jig-bracket-universal_2off belt-width-adjuster_1off circuit-board-bracket-m3_4off circuit-board-spacer-m4_2off drive-pulley_3off frame-vertex_6off x-180-z-bearing-plate_2off x-360-z-bearing-plate-mirror_2off x-360-z-bearing-plate_2off x-axis-side-plate-nut-jig_2off x-bar-clamp-m3_6off x-bar-clamp-m4_4off x-cable-clamp_1off x-carriage-belt-clamp_2off x-carriage-lower_1off x-carriage-upper_1off x-end-bracket_2off x-motor-bracket-spacer_2off x-vert-drive-nut-trap_4off x-vert-drive-side-plate-180-end_2off x-vert-drive-side-plate-360-end_2off xlr-bracket_1off y-bar-clamp_10off y-bearing-180-inner_2off y-bearing-180-outer-left_1off y-bearing-180-outer-right_1off y-bearing-360-inner_2off y-bearing-360-outer-left_1off y-bearing-360-outer-right_1off y-belt-clamp_2off y-idler-bracket_1off y-motor-bracket_1off z-axis-opto-spring_1off z-bar-top-clamp_4off z-drive-pulley-rim_4off z-driven-pulley_2off z-leadscrew-base-bar-clamp_2off z-leadscrew-base_2off z-motor-bracket_1off z-opto-bracket_1off z-tensioner_1off Thanks everyone, Trescott Jensen P.S. I know that you post pictures when selling as a way of proving that it's not a scam, but I don't know what you do when buying to prove that it's not a scam. So if you need anything from my to show that I am legitimate, please let me know. https://reprap.org/forum/read.php?95,45637,45637#msg-45637 Tue, 21 Jul 2026 15:55:20 -0400 Phorum 5.2.23 https://reprap.org/forum/read.php?95,45637,45913#msg-45913 https://reprap.org/forum/read.php?95,45637,45913#msg-45913
I'm in Ogden, Utah. Any chance you would be heading up to northern Utah on your trip?
If you wanted to get together, I would be interested. PM me if you are interested.]]> trescott2000 Wanted Wed, 19 May 2010 03:47:36 -0400 https://reprap.org/forum/read.php?95,45637,45870#msg-45870 https://reprap.org/forum/read.php?95,45637,45870#msg-45870 jgilmore Wanted Tue, 18 May 2010 13:05:11 -0400 https://reprap.org/forum/read.php?95,45637,45809#msg-45809 https://reprap.org/forum/read.php?95,45637,45809#msg-45809
I didn't realize that the more expensive parts were the ones that you only needed one of. I just thought that it would be the larger ones that were more expensive. And it seemed that the big corner pieces (frame-vertex) were the biggest, but then that's what happens when you haven't ever seen them.

I really thought I would have to try to work from the AOI files or something like that. But It looks like Triffid.hunter has those nice printouts for all the parts. I think I'll have to try using those to see if I can do it from those.

I had looked in the Utah group and didn't see anyone there who actually had a Reprap. I did see several people looking for someone who did have one, but no one replied saying that they did. So if I get mine put together soon, I may be the first in my area. But I'm not trying to be first, it just may end up being that way.

If anyone out there does want to take me up on my request, I am still willing to consider it, but in the mean time I am going to play with the printouts that are on triffid.hunter and see if that's enough for me to get it right.

Thanks,

Trescott]]> trescott2000 Wanted Mon, 17 May 2010 18:51:26 -0400 https://reprap.org/forum/read.php?95,45637,45747#msg-45747 https://reprap.org/forum/read.php?95,45637,45747#msg-45747 > Why not just make them all myself? Because I've
> never seen one before in person, and I would feel
> more comfortable working with good reference
> models. So I am asking for just the specific parts
> I need to get started.

I understand and agree that it's hard to visualize the parts in the beginning, I just think it would be an expensive way to save money if you have the necessary tools already. ;) The largest, most difficult to print and thus most expensive parts, normally only need one of each. The parts which there are many similar of, are the smallest and cheapest parts. So you wouldn't save much money if you don't want them.

Take this beautiful frame-vertex by triffid.hunter as an example for visualization. Print it out in 1:1 and see what you think.

You would benefit greatly from a drill press and a band saw, but it's not a difficult piece to make, and can be simplified a lot if you so please.

There is also the laser cut complete kits. And partial kits. How much you save on this is of course depending on how cheap you can source the hardware.

I am close to $1000 in expenses on my wooden mendel. But I like to build things, so it's worth it. :)]]> Nudel Wanted Mon, 17 May 2010 05:02:35 -0400 https://reprap.org/forum/read.php?95,45637,45737#msg-45737 https://reprap.org/forum/read.php?95,45637,45737#msg-45737
Why don't I buy one on ebay? Because there isn't always one being sold. I posted this message after seeing that there wasn't any on ebay at that time. Also, those are complete sets with redundant parts, and I am trying to save some money by making the rest myself.

Why not just make them all myself? Because I've never seen one before in person, and I would feel more comfortable working with good reference models. So I am asking for just the specific parts I need to get started.

If you are angry because you don't like the price I suggested, then tell me what you think is fair! If you don't want to be helpful, then you don't have to reply. But there is no need to be nasty about it.

I do appreciate the well meaning replies, Thank you.]]> trescott2000 Wanted Mon, 17 May 2010 02:17:52 -0400 https://reprap.org/forum/read.php?95,45637,45692#msg-45692 https://reprap.org/forum/read.php?95,45637,45692#msg-45692 > So I wanted to get
> one of each of the printed parts for Mendel and
> then I would use those as a guide for making the
> rest I need.

If you have the tools and skills, I would suggest making all the parts by yourself. I gathered inspiration from the many wooden mendel builds, especially http://wooden-mendel.blogspot.com/.

That way, you can spread the expenses over a longer period of time. And if there are some parts you are unable to make, you can ask to buy those specific parts here on the forum.

Good luck!]]> Nudel Wanted Sun, 16 May 2010 15:34:21 -0400 https://reprap.org/forum/read.php?95,45637,45674#msg-45674 https://reprap.org/forum/read.php?95,45637,45674#msg-45674 spacexula Wanted Sun, 16 May 2010 10:08:54 -0400 https://reprap.org/forum/read.php?95,45637,45645#msg-45645 https://reprap.org/forum/read.php?95,45637,45645#msg-45645
WHY DON'T YOU BUY A SET FROM EBAY, THEN!!!]]> hintss Wanted Sun, 16 May 2010 02:27:37 -0400 https://reprap.org/forum/read.php?95,45637,45637#msg-45637 https://reprap.org/forum/read.php?95,45637,45637#msg-45637
I'm trying to get into the Reprap world, but I'm tight on cash as we all are. So I wanted to get one of each of the printed parts for Mendel and then I would use those as a guide for making the rest I need.

I was thinking that about $100USD plus shipping would be good sense I've seen complete sets going on eBay for about $200, but you tell me what you think is fair and we'll see if we can agree on something.

You would be shipping to Ogden, Utah (USA), so I would prefer someone local if possible, but I'll take what I can get, so I am willing to pay international shipping if necessary.



This is the list of printed parts as I understand it. If this is worng, I would appreciate being corrected.

bed-height-spacer-31mm_1off
bed-spring_4off
belt-split-jig-bracket-universal_2off
belt-width-adjuster_1off
circuit-board-bracket-m3_4off
circuit-board-spacer-m4_2off
drive-pulley_3off
frame-vertex_6off
x-180-z-bearing-plate_2off
x-360-z-bearing-plate-mirror_2off
x-360-z-bearing-plate_2off
x-axis-side-plate-nut-jig_2off
x-bar-clamp-m3_6off
x-bar-clamp-m4_4off
x-cable-clamp_1off
x-carriage-belt-clamp_2off
x-carriage-lower_1off
x-carriage-upper_1off
x-end-bracket_2off
x-motor-bracket-spacer_2off
x-vert-drive-nut-trap_4off
x-vert-drive-side-plate-180-end_2off
x-vert-drive-side-plate-360-end_2off
xlr-bracket_1off
y-bar-clamp_10off
y-bearing-180-inner_2off
y-bearing-180-outer-left_1off
y-bearing-180-outer-right_1off
y-bearing-360-inner_2off
y-bearing-360-outer-left_1off
y-bearing-360-outer-right_1off
y-belt-clamp_2off
y-idler-bracket_1off
y-motor-bracket_1off
z-axis-opto-spring_1off
z-bar-top-clamp_4off
z-drive-pulley-rim_4off
z-driven-pulley_2off
z-leadscrew-base-bar-clamp_2off
z-leadscrew-base_2off
z-motor-bracket_1off
z-opto-bracket_1off
z-tensioner_1off

Thanks everyone,

Trescott Jensen

P.S. I know that you post pictures when selling as a way of proving that it's not a scam, but I don't know what you do when buying to prove that it's not a scam. So if you need anything from my to show that I am legitimate, please let me know.]]> trescott2000 Wanted Sun, 16 May 2010 00:20:43 -0400