Reprap Forum - Wanted

DLP Projector, converted (3 replies)

hearbob — Thu, 22 Jan 2026 16:32:48 -0500

Hi, I am looking for a DLP projector that someone might have that was converted for SLA printing. I that maybe a past project that is collecting dust etc. Thanks

RAMPS 1.4.4, RAMPS-FD, or RADDS (no replies)

Progr3ss — Tue, 18 Jun 2024 10:45:44 -0400

Hi all,
I am looking for one of the due shield type controllers. I have only been able to find the RADDS board from UK, but it is nearly $200 with shipping to the US. I am hoping that someone in North America has one sitting around and is willing to sell it.
Thanks
Scot

Looking for older LCD's (no replies)

Dust — Wed, 30 Dec 2020 21:47:14 -0500

I'm being very hopeful here.

Looking for anyone who has a old Panucatt VIKI LCD and are willing to part with it. (not a Viki 2.0)

Also looking for a old PANELOLU2 LCD

Check your junk draws people, someone must have one somewhere...

[Wanted] Makerbot automated build platform in working, or non-working condition (no replies)

Dowhilegeek — Sat, 16 May 2020 21:44:47 -0400

I know its ancient and terrible, but I have my reasons.

Custom 3d printer screen - URGENT (no replies)

EzyMan — Sat, 07 Dec 2019 10:36:33 -0500

Hello guys,

Hope you are doing well,

recently i purchased this printer:

TWO TREES® BLUER 3D Printer

this printer has MKS ROBIN NANO Mainboard.

if i want to change the name of the printer, wana name it with my daughter's name <3

is it possible? and what do i have to do and whats required?

As i know, some of printers are restricted and cant be modified. IF this printer cant be, i can modify the Creality Ender-3?

I know i dont have that good experience but with you guys i can make everything.

Thank you so much for your usual support.

Thanks.

Re: Wanted: P3steel Toolson MK2 printed parts - PETG (1 reply)

va3rjy — Fri, 15 Feb 2019 16:54:27 -0500

I have attached a excel spread sheet of what I need printed.

38 items

Note quantity, specs, etc of highlighted items in spreadsheet.

I can email a zip file of all stl's if required.

Mendel90 MDF parts (1 reply)

TerryK — Wed, 07 Aug 2019 07:08:12 -0400

Hi,

I've got an old Mendel (Prism style) which I haven't used for a while. I'd like to refurb it by getting MDF or Dibond panels for it.

Can anyone supply these?

regards

Terry Kidd

Wanted Duet 0.8.5 (2 replies)

teos81 — Tue, 20 Feb 2018 12:01:09 -0500

Hi to all,
i know that it's very hard to find.. but i try..

I need a duet 0.8.5 used or a new one with discount price..
I live in italy.

Thanks
Best Regard
Matteo

teos.81@gmail.com
phone/wapp +39 338 2855778

Markforged or composite filament sample (2 replies)

tleneel — Thu, 20 Jul 2017 03:15:13 -0400

Hello,
I am looking to buy composite filament samples. It could be, carbon fiber, fiberglass, with PA or PLA or even peek.
Markforged is an example of what I'm looking for.
One meter would be perfect.
Best regards

[Uk] Wanted Duet 0.85 board (1 reply)

chris33 — Thu, 27 Apr 2017 17:14:48 -0400

Hi,

if any has a duet 0.85 board used but fully working and able to post uk message me with a price please many thanks

~1m of 3mm nylon in the uk? (2 replies)

slippyr4 — Tue, 04 Apr 2017 08:06:07 -0400

Anyone with a roll of 3mm nylon be prepared to post me a 1m short length if i paypal you a beer token?

thanks

slippyr4

Looking for stepper motors (2 replies)

Michaelkhn7 — Sat, 21 Apr 2018 02:54:15 -0400

Hey all,

I'm looking for second hand Nema 17 stepper motors. I need 5 of them!

[Wanted] Duet 0.85/Wifi Board (3 replies)

Riggi — Mon, 20 Feb 2017 21:05:55 -0500

Hi,

I'm currently in the progress of gathering all the parts I need to build myself a delta printer. As I'm on a rather tight budget, I'm looking for a cheap, second hand Duet 0.85 or Duet WiFi that someone has no use for anymore.

If anyone can help me find one, or have one themselves they are looking to sell, it would be much appreciated!

- Riggi

[Wanted] Prusa i3 X Axis parts (no replies)

HarshReality — Thu, 02 Feb 2017 12:39:08 -0500

Hello,
.. Been awhile but I'm currently revisiting an old project. What I am in need of is the printed parts for a Prusa i3.. Specifically the X-axis end idler, end motor & carriage. I currently have a makerfarm i3 8" and never quite got it going 'right'. So as these are the most problematic parts for me being wood and a total lack of adjustment I'd like to replace them with 'OE' printed parts and see if I can in fact get it resolved. Any assist would be greatly appreciated. I've stared at this incomplete project for over 3 years... time to get it together.

WANTED: Someone to finish my Roaddog Labs Bart for me (Michigan) (no replies)

carl67lp — Mon, 09 Jan 2017 11:30:59 -0500

I've come to the realization that while I enjoy 3D printing, I do *not* enjoy building 3D printers. It's just too time-consuming and fiddly for me.

Thus I'm looking for someone to finish building my Roaddog Labs 3D printer. It's probably 80% done mechanically. It'd need to have the rest of the mechanical stuff done (x-axis belt, hot end assembly/installation, bed installation, maybe a couple of other things). The wiring also needs to be done.

I have all the parts, save for the power supply, and just need someone to finish things up. It probably could use some better linear bearings, though, so there's that.

I live in SE Michigan, but would be willing to drive a bit depending on what's available.

Anyone willing to take a crack at this? If so, let me know what you'd charge!

worm type gear reduction mechanism (1 reply)

the_digital_dentist — Fri, 06 Jan 2017 16:57:30 -0500

Looking for something in the 20-30:1 range, preferably with a NEMA-23 input, but not absolutely necessary. One of the Ondrives Rino devices would be especially nice...

What do you have? What do you want for it?

[WTB][UK, Manchester] Mendel90 parts (10) (no replies)

kouvas — Mon, 14 Nov 2016 10:29:59 -0500

Hi All,

I need a total of 10 parts for my mendel90 which were broken due to being over-tightened. I need them in ABS or HIPS any colour.

I would prefer someone from Manchester UK or around to pick them up but will certainly consider shipping in reasonable prices. Will pay for cost and your time of course.

PM with a price please.

Thanks you in advance.

UK Just starting out. (no replies)

Rlewisrlou666 — Tue, 18 Oct 2016 19:18:10 -0400

Hi there all,

I'm just starting out building my printer on a tight budget anyone with old kit/parts laying about gathering dust or bit and bobs you bought and didn't like or they didn't work.

I tinker with most things and would like to get my hands on some stuff to play with.

Free would be absolutely incredible (I can pay postage) depending on the size and price.

As cheap as you'd be will to let them go for I'll see if my budget can accommodate.

Once I'm up and running with my build I'll pay it forward and pass it on to anyone else in need.

Many Thanks Ryan.

P.S To all the Devs/Companies with products that need testing or reviewing I'm willing to help anyway I can.

anyone willing to print abs for cost of filament + shipping? (no replies)

The Borg — Thu, 28 Jul 2016 18:22:32 -0400

needs printer parts in abs, they need to be built well square flat and true. if parts arn't accurate i heard the printer won't be either so, yah, please know what your doing. i heard there's some nice folks here that will print the parts i just have to pay for the filament and shipping so, let me know.

Prusa i3 8" (Makerfarm) (no replies)

HarshReality — Wed, 22 Jun 2016 19:33:24 -0400

Was wondering if there was anyone in the Indiana area (or elsewhere) who could help me out by printing me the parts for the X axis so I can replace the 'wood' on my MakerFarm i3 8". I got the thing a few years back and never really got it dialed in but the X carriage was always a little dodgy. If you can help veply or drop me a PM or even eMail to hreality [at] gmail [dot] com.

Danke!

Acrylic covered printer (no replies)

calad — Thu, 02 Jun 2016 15:30:06 -0400

Hi. I need a 3d-printer with cover that is able to print ABS. Think3dprint3d does not sell anymore mendel90 with acrylic cover so Im here asking is somebody can recommend so shop to me.

[WTB][Finland]P3Steel v4 printed parts (no replies)

Vuokko — Thu, 07 Apr 2016 16:26:15 -0400

I'm building not so popular P3steel v4 200x300mm printer as my first printer and I'm missing the printed parts.
If someone has good ABS process and want to melt some filament, ship the parts and get financially compensated, please PM me.

Parts STLs are available on github: [github.com]

WTB [AUS] Printed Parts for Prusa I3 Box Frame for my 1st printer (1 reply)

eggman — Fri, 08 Apr 2016 02:49:37 -0400

WTB [AUS] Printed Parts for Prusa I3 Box Frame for my 1st printer

Looking for someone to print all the required parts for me
I'm sure there will be some questions which we will have to figure out, like extruder type, bearings ext. Which I am open to suggestions.

Fisher Delta printer or parts in U.S. (3 replies)

BioLumo — Sun, 28 Feb 2016 04:39:00 -0500

I'm not in the market for one of these just yet, mostly just casting a line and seeing if anything bites.

But i'm interested in the future in getting a RepRap Fisher Delta printer from someone in the U.S. It's so new that i haven't seen any offered anywhere. Especially since i just learned RepRapPro shop in the U.K. has closed down.

wtb some 3d printer parts for my first printer (1 reply)

pochito413 — Wed, 16 Mar 2016 10:16:13 -0400

I am making 3d printer. It will be my first. This will get me into the world of 3d printing.
These are the files that i need printed
[www.thingiverse.com]

List of what i need is as follows. the quantity of each part is in parenthesis
(2)3d print corner short repaired mirrored
(1) 3d y slide 2 repaired
(2) 3d print corner short repaired
(1) 3d y slide repaired
(1) bottom x slide
(1) top x slide
(4) belt holder
(2) vertical screw 2
(8) vertical rod holder
(2) vertical screw 1

Parts need to be printed out of abs with a 4mm shell thickness and a minimum 35% infill. Please give me a quote for the parts. Thank you for any help you are able to provide.

If you are willing to print some parts but not all, give me a price on the parts you can print and i will update the list as i get the parts.

I KNOW I AM NEW AND SOME MIGHT NOT BE WILLING TO WORK WITH A NEW GUY, BUT I WILL PAY THROUGH PAYPAL GOODS so we both are secured with the money.

BTW: I am out of Massachusetts USA

[NEEDED] Experienced 3D software developer (no replies)

DataTree3D — Wed, 23 Dec 2015 10:30:03 -0500

Job description

Software is at the center of our product development; we develop Creation Workshop, a slicer and machine control host for 3d printing. Please go to DataTree3D.com for more details.
DataTree3D is a provider of 3D solutions for industrial manufacturers, hobbyists, and students alike. Our software, Creation Workshop is a feature-rich toolkit that users can draw upon to control, monitor, and drive 3D printers and industrial control equipment. We offer top of the line UV projectors with resolutions as high as 1080p, along with a full line of FDA registered resin with choices in color, hardness, flexibility, and cure rate. Our goal is to make the benefits of the newest, most advanced 3D creation software and supplies accessible to all consumers at an affordable rate.
We need an experienced developer to interface and gather client requests
The job:
-Collaborate with clients and our developer to enhance our software
You:
5+ years C++ / C# experience
2D / 3D / OpenGL
G-Code / CNC experience a bonus.

Please contact Annie Collier at Annie.collier@datatree3d.com to learn more or apply.

Nylon PA46 Granules or Filament (no replies)

PulsedMedia — Thu, 26 Nov 2015 15:58:28 -0500

I am in market for some Nylon PA46 granules.
This is the stuff BMW (and probably other MFGs too) make their intakes.

I'm in market for a few kilos of the stuff, or cheap shredder so i can just buy BMW intakes and recycle that.

Payment via Paypal, shipping either within US or EU, doesn't matter got my contacts to get stuff shipped for cheap from the US :)

Prusa i2 X Carriage Needed! (no replies)

Carsecond — Mon, 16 Nov 2015 19:33:50 -0500

Hello - I am building a prusa i2 and I need an x carriage that will work with the fan on my all metal hotend, which will currently not fit under my x carriage. Is there anywhere I can purchase one that will surely fit the fan or would someone print one for me? I can pay haha

[WANTED] Full set of Prusa Mendel (1st iteration) printed parts and full set of threaded rods (no replies)

garyrsanchez — Sat, 07 Nov 2015 22:32:42 -0500

Please send me a PM if you want my money!

Need Empty Spools (2 replies)

cmcc — Fri, 30 Oct 2015 18:26:35 -0400

If you have a bunch of empty spools and don't want to throw them away, I could really use them. I've been snagging them on Ebay for about $2
with shipping when they come up, but can't get them in any reasonable quantity. Most people are selling the for under $2 with crazy high shipping prices, $5-$7 per spool. If anyone would be willing to help me out with reasonable prices I would be greatly appreciate it.

Feel free to contact me at mccloskchris@gmail.com for the fastest response.