Connecting... echo:Unknown command: "~" Printer is now online. Using tool 0. echo:Active Extruder: 0 >>> M122 SENDING:M122 X Y Z E E1 Address 0 0 0 0 0 Enabled false false false false false Set current 950 950 950 950 950 RMS current 939 939 939 939 939 MAX current 1324 1324 1324 1324 1324 Run current 16/31 16/31 16/31 16/31 16/31 Hold current 8/31 8/31 8/31 8/31 8/31 CS actual 8/31 8/31 8/31 8/31 8/31 PWM scale 10 10 10 10 10 vsense 0=.325 0=.325 0=.325 0=.325 0=.325 stealthChop true true true true true msteps 16 16 16 16 16 tstep max max max max max pwm threshold [mm/s] OT prewarn false false false false false OT prewarn has been triggered false false false false false off time 3 3 3 3 3 blank time 24 24 24 24 24 hysteresis -end -1 -1 -1 -1 -1 -start 1 1 1 1 1 Stallguard thrs 60 60 94 0 0 DRVSTATUS X Y Z E E1 stst * * * * * olb ola s2gb s2ga otpw ot 157C 150C 143C 120C s2vsa s2vsb Driver registers: X 0xC0:08:00:00 Y 0xC0:08:00:00 Z 0xC0:08:00:00 E 0xC0:08:00:00 E1 0xC0:08:00:00 Testing X connection... OK Testing Y connection... OK Testing Z connection... OK Testing E connection... OK Testing E1 connection... OK echo:Active Extruder: 0 echo:busy: processing echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:busy: processing SENDING:M84 echo:busy: processing echo:Active Extruder: 0 echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing echo:Active Extruder: 0 >>> G29 Q SENDING:G29 Q current_position= X0.00 Y50.00 Z20.00 : >>> G29 Machine Type: Cartesian Probe: NONE Probe Offset X0.00 Y0.00 Z2.00 (Aligned With & Above Nozzle) Auto Bed Leveling: BILINEAR (disabled) >>> M420 V SENDING:M420 V Bilinear Leveling Grid: 0 1 2 3 4 5 6 7 8 9 10 11 0 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 1 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 2 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 3 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 4 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 5 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 6 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 7 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 8 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 9 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 10 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== 11 ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== ===== echo:Bed Leveling OFF echo:Fade Height OFF