x_rod_distance = 45; // Select your belt type ****************************************************** //T2.5 belt_tooth_distance = 2.5; belt_tooth_ratio = 0.5; //T5 (strongly discouraged) //belt_tooth_distance = 5; //belt_tooth_ratio = 0.75; //HTD3 //belt_tooth_distance = 3; //belt_tooth_ratio = 0.75; //MXL //belt_tooth_distance = 2.032; //belt_tooth_ratio = 0.64; // Select your hot-end mount ****************************************************** // 0 = none; 1 = groove-mount (J-head/MakerGear etc.) hotend_mount = 1; hotend_groovemount_depth = 5; hotend_groovemount_diameter = 16;