Sketch uses 1,208 bytes (0%) of program storage space. Maximum is 130,048 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 16,375 bytes for local variables. Maximum is 16,384 bytes. C:\Program Files\arduino-1.6.9\hardware\tools\avr/bin/avrdude -CC:\Program Files\arduino-1.6.9\hardware\tools\avr/etc/avrdude.conf -v -patmega1284p -carduino -PCOM7 -b57600 -D -Uflash:w:C:\DOCUME~1\John\LOCALS~1\Temp\buildc932c35d8645ab668cd38df87bda09c8.tmp/Blink.ino.hex:i avrdude: Version 6.0.1, compiled on Apr 15 2015 at 19:59:58 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch System wide configuration file is "C:\Program Files\arduino-1.6.9\hardware\tools\avr/etc/avrdude.conf" Using Port : COM7 Using Programmer : arduino Overriding Baud Rate : 57600 AVR Part : ATmega1284P Chip Erase delay : 55000 us PAGEL : PD7 BS2 : PA0 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 10 128 0 no 4096 8 0 9000 9000 0xff 0xff flash 65 10 256 0 yes 131072 256 512 4500 4500 0xff 0xff lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 Programmer Type : Arduino Description : Arduino Hardware Version: 2 Firmware Version: 1.16 Vtarget : 0.0 V Varef : 0.0 V Oscillator : Off SCK period : 0.1 us avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.02s avrdude: Device signature = 0x1e9705 avrdude: reading input file "C:\DOCUME~1\John\LOCALS~1\Temp\buildc932c35d8645ab668cd38df87bda09c8.tmp/Blink.ino.hex" avrdude: writing flash (1208 bytes): Writing | ################################################## | 100% 0.39s avrdude: 1208 bytes of flash written avrdude: verifying flash memory against C:\DOCUME~1\John\LOCALS~1\Temp\buildc932c35d8645ab668cd38df87bda09c8.tmp/Blink.ino.hex: avrdude: load data flash data from input file C:\DOCUME~1\John\LOCALS~1\Temp\buildc932c35d8645ab668cd38df87bda09c8.tmp/Blink.ino.hex: avrdude: input file C:\DOCUME~1\John\LOCALS~1\Temp\buildc932c35d8645ab668cd38df87bda09c8.tmp/Blink.ino.hex contains 1208 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 0.38s avrdude: verifying ... avrdude: 1208 bytes of flash verified avrdude done. Thank you.