I've got two different 100K glass bead thermistors, 1 on the hot end and 1 under the bed. While I was chasing down another problem, I found that the resistance on the two therms were different, although neither had been on for a few hours. Is this something I should be accounting for in the tables? If yes, please god show me how and where.
Things are hot right now, but I'll check differences in the morning if it helps give insight. If memory serves 1 was around 100 and the other was maybe 97?
Josh
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//Prusa / RAMPS_1.4 & ATMega_2560 / Slic3r > Pronterface > Marlin / Luck
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++