Welcome! Log In Create A New Profile

Advanced

help me frameware

Posted by ahmed powera 
Forum List Message List New Topic
ahmed powera
help me frameware
October 26, 2017 05:30PM
hi
i have frameware "Marlin_Prusai3_reprap_pt" ,and kit ramps ,arduino mega,lcd
so when i chose "#define MOTHERBOARD 33" and verify it give me "compilation terminée" ,but the problem the lcd not show a lot of menu and extruder not work ,so when i chose "#define MOTHERBOARD 3" and click verify it give me error " 'LCD_PINS_RS'was not declared in this scope" so what the solution
thank you

Edited 2 time(s). Last edit at 10/26/2017 05:33PM by ahmed powera.
Reply Quote
Dust
Re: help me frameware
October 26, 2017 07:45PM
If its expecting number for the motherboard its a really old firmware

You you take a look at the current version and set motherboard "BOARD_RAMPS_13_EFB"

[github.com]

Also you can turn on verbose mode in the ardunio IDE by File->Preferences->Show verbose output during:. Tick boxes for compilation and upload. This will give you lots more information
Reply Quote
ahmed powera
Re: help me frameware
October 27, 2017 06:31PM
it show bad symbole
like this

why

Edited 5 time(s). Last edit at 10/27/2017 07:55PM by ahmed powera.
Reply Quote
Roberts_Clif
Re: help me frameware
October 27, 2017 08:15PM
Hello;

Attach your Configuration.h file will see what you may have missed. Or you could try to setup Newer Marlin 1.1.X versions.
Reply Quote
Dust
Re: help me frameware
October 28, 2017 01:32AM
What bad symbols?

X,Y and Z are flashing because you haven't homed the axis

FR is feed rate at %100 and the clock is the print time.
There is also a thermometer like icon indicating temperatures and a ° to indicate degrees
Reply Quote
ahmed powera
Re: help me frameware
October 28, 2017 06:07AM
thank you it solve this problem
but now the heat extruder and fun extruder not working
not heating
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login