Quote
Ohmarinus
Could it be you have G29 in your startup script in your slicing software?
Nope nothing.. I'm not sure if anything else needs to be taken out?
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
M420 S1
G28 Z0 ;move Z to min endstops
M420 S1
G0 X0 Y35 F9000 ; Go to front
G0 Z0.25 ; Drop to bed
G92 E0 ; zero the extruded length
G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line
G92 E0 ; zero the extruded length
G1 E-1 F500 ; Retract a little
G1 X80 F4000 ; Quickly wipe away from the filament line
G1 Z0.3 ; Raise and begin printing.