Repko Raptor Printer Repair

Hi All,

I purchased a Repko Raptor printer in 2018.
It was working fine till a year ago when there was a clog in the hot-end and it caused some damage to the extrusion set.
I tried finding a replacement kit, but Repko LLC went dark and closed down and it turns out despite marketing their printer as a Creality CR-10, their extrusion parts are 24V while Creality stock parts are 12V.
So, I am not able to find compatible parts on the market. Therefore, I think I have two options. Either fix it myself by hardwiring a 24V fan and hot-end kit to the port on the control box and hope it works, or just throw out the printer and buy a new one.
Any Recommendations?

Thanks,
Michael

Many creality printers are 24v including the cr10 v2

What exactly do the parts you looking for look like? Ie take pictures!

Hi,

Im looking for an extruder hot-end kit. The parts I'm looking for looks exactly like this:
Specifically, the connection to the control box is the same for my printer, the screw placements for the fan housing and hot-end is the same and fits for my printer. The only issue is the aforementioned 12V instead of the 24V my printer expects.
I have also attached a couple pictures of my printer for some context:


This is a picture of the printer:


Thanks,
Michael