Repetier-Host Homing Direction

Hi

When homing my CubeX Y-Axis the head moves in the wrong direction for my home sensor location. It moves towards the from of the machine but my sensor is located at the rear.
I've changed the #define Y_HOME_DIR -1 to #define Y_HOME_DIR 1 but now the Y-Axis does not move when Y-Axis homing selected.

Any Ideas?


//// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
#define X_HOME_DIR -1
#define Y_HOME_DIR 1
#define Z_HOME_DIR -1

Working now.
I found these settings solved my problem.

#define Y_HOME_DIR 1
#define MIN_HARDWARE_ENDSTOP_Y false
#define MAX_HARDWARE_ENDSTOP_Y true

Solved my problem!
Thanks for posting!