Welcome! Log In Create A New Profile

Any way to mirror a print?

Posted by AVRkire

AVRkire

Any way to mirror a print?
July 28, 2013 02:05PM

Registered: 13 years ago
Posts: 121

I am trying to mirror a print. I am using slic3r or KSSlicer, and either repetier or pronterface.

I don't see any way to mirror in any of those.

My design is in openscad, so if there is even a way to do it there it would be great too.

Thanks!

Reply Quote

kburr

Re: Any way to mirror a print?
July 28, 2013 03:10PM

Registered: 14 years ago
Posts: 72

If I remember correctly ReplicatorG was able to do that. I think you might be able to mirror and save as a new STL as well.

Reply Quote

AVRkire

Re: Any way to mirror a print?
July 28, 2013 03:40PM

Registered: 13 years ago
Posts: 121

Thanks. I actually found there is a mirror function in openscad, so that is working perfectly for me.

Reply Quote

jbernardis

Re: Any way to mirror a print?
July 28, 2013 04:34PM

Registered: 14 years ago
Posts: 1,320

There's probably a mirror function in meshlab too if you don't have openscad source.

Reply Quote

IceMan

Re: Any way to mirror a print?
July 30, 2013 08:53AM

Registered: 14 years ago
Posts: 140

Netfabb will do it as well

Regards
Jan

======================================
[3dprinting4u.wordpress.com]

Reply Quote

AVRkire

Re: Any way to mirror a print?
July 30, 2013 08:56AM

Registered: 13 years ago
Posts: 121

Thanks everyone.

Since my design was in openscad, the mirror function in openscad got me exactly what I needed.

I will keep this in mind if ever dealing with an stl that I did not design myself.

Thanks!

Reply Quote

jzatopa

Re: Any way to mirror a print?
July 30, 2013 02:44PM

Registered: 13 years ago
Posts: 334

flip your y or x motor around or set firmware to invert in the direction needed.

Reply Quote

Optimist

Re: Any way to mirror a print?
July 30, 2013 02:48PM

Registered: 13 years ago
Posts: 76

If you'd have the model avialable ( step / STL OBJ) I could flip it for you

Reply Quote

kburr

Re: Any way to mirror a print?
July 30, 2013 03:32PM

Registered: 14 years ago
Posts: 72

Oh, and the current version of KISSlicer also has a mirroring capability, just right click the object in the top right column and it's in the.drop down that appears.