RapMan 3.2 XY calibration file and fimware (newbie here)

Hi everyone, this is my first time using this forum, so if this kind of request is not appropriate, then I apologize.

I have recently assembled a RapMan 3.2, which has been discontinued a while ago. This means that the download links for everything regarding the printer are now dead in the official website.

I am curently running the firmware version 5.3.1, which is not the most recent one, but it should work fine. If someone has the 5.4.2 version, I would greatly appreciate it.

What I do need, however, is the dual-extruder XY calibration file. I don't know if someone still has it, but if you do, please upload it somewhere.

I`ll just leave the link, in case someone wants to see it by him/herself: 3dpedia.3dsystems.com

Once again, I apologize if this is inappropriate, but I really want to start 3D printing.

Thanks in advance.

instructions, at least when i last updated mine :

[3dpedia.3dsystems.com]



[cubify.com]

scroll down and look for firmware.

jamesdanielv Wrote:
-------------------------------------------------------
> instructions, at least when i last updated mine :
>
> [3dpedia.3dsystems.com]
> s/3D+Touch+and+RapMan+3.2+Firmware+Update+Instruct
> ions

Does that link work for you? I can't access any of the 3dpedia stuff anymore.

@JohnManshaft:

You might try asking the google group [groups.google.com], but it does not seem very lively.

Long term, you might think about retrofitting some Reprap electronics.

the link no longer works for me either, the second link to the firmware does. just in case i have attached the firmware. it includes the loader file

Edited 1 time(s). Last edit at 08/01/2013 08:16PM by jamesdanielv.