Purple Prusa i3 Build

Hi Everyone,

I wanted to share some pics of a new Prusa i3 Single-plate build that I've recently completed. For some bling, it's finished in anodized purple aluminium, yellow ABS parts and marine-grade stainless. It uses 10mm threaded rods and 10mm smooth rods for the Y-axis, 8mm for X and Z. Prints like a dream... not completely happy with the standard Prusa parts, I've also modded some of the parts to perform better... especially the Z end-stop.

That is a beautiful printer. Some excellent photography too.

Good looking printer. I like the Z endstop mounts. I'm not pleased with any of the i3 endstop mounts I've tried so far. Are your source files available?

I was lazy and did the Z-stop in 123D... I know, I know I should have used Open-SCAD. The height of mine is custom for the SC10UU platform.

vegasloki Wrote:
-------------------------------------------------------
> Good looking printer. I like the Z endstop
> mounts. I'm not pleased with any of the i3
> endstop mounts I've tried so far. Are your source
> files available?

I was lazy and did the Z-stop in 123D... I know, I know I should have used Open-SCAD. The height of mine is custom for the SC10UU platform.

Thanks. No worries as I was going to fork the design to better fit the non Prusa repo X ends that I use. OpenSCAD is a good parametric modeler for programmer types but I think in the long run something with a more traditional graphic interface will become standard. At least for the non programmer types. And it's probably going to be something like 123D or a future version of Sketchup.

Where are the files for that LCD holder?

jimmy0x52 Wrote:
-------------------------------------------------------
> Where are the files for that LCD holder?

[www.thingiverse.com]

Very nice build!

Did you have to modify the plate to fit the larger smooth rods?

-Z

I can't see the pictures files ? Have they been removed from your post ?
Thanks

Jean Marc

Great looking machine. Yes... I have the usual questions about parts, plans, etc., if they're available anywhere.

Thanks a million,
Ed in Columbus, Ohio, USA

GTIspeeder Wrote:
-------------------------------------------------------
> vegasloki Wrote:
> --------------------------------------------------
> -----
> > Good looking printer. I like the Z endstop
> > mounts. I'm not pleased with any of the i3
> > endstop mounts I've tried so far. Are your
> source
> > files available?
>
> I was lazy and did the Z-stop in 123D... I know, I
> know I should have used Open-SCAD. The height of
> mine is custom for the SC10UU platform.

open-scad? Ain't nobody got time for that.

Seriously though that is a nice looking printer. I am sure some people would be interested having access to the parts you made.