Prusa i3 Single Frame

Hi guys,
like a title of topic I want to build a reprap Prusa i3 single frame, standard version.

So I ask you if anyone can help me. I need of the sketchs of all plastic printer parts (Solidworks, dwg, dxf)
If anyone wants to share

Thanks a lot

I'm in the process of building an i3 myself, and I can't say I've experienced anything that I would refer to as a "standard version." In fact, I've dug all the way into OpenScad files to create some parts that included beneficial features from multiple places. You're almost certainly going to want to create the STLs yourself for the settings of your choosing (e.g., bearing size, threaded rod size, etc.)

All that said, you might be referring to the Prusa github. The single plate version, somewhat confusingly, is now built with appropriate settings in the box_frame directory. If you'll forgive the tongue-in-cheekiness of the link...

[lmgtfy.com]

Edited 2 time(s). Last edit at 11/21/2013 12:59PM by Karmavore.

Prusa i3 wiki

Image of Printed Parts

GitHub

... one might also add that there is a very active area on the forum devoted to all things i3...

...I ask you to be patient with me....in this area (3d printer) I'm a new member, so I accept advice from anyone which wants to give them.

Thanks a lot

Quote
Karmavore
All that said, you might be referring to the Prusa github. The single plate version, somewhat confusingly, is now built with appropriate settings in the box_frame directory. If you'll forgive the tongue-in-cheekiness of the link...

The base single plate build now has its own repo called "vanilla". It has enough info to get a basic printer going.

[github.com]