Endstop for the X axis on Prusa i3 from repramuniverse

Forum List Message List New Topic

Siemann

Endstop for the X axis on Prusa i3 from repramuniverse
December 28, 2013 03:31PM

Registered: 12 years ago
Posts: 6

Hello! I am first build prusa i3 printer from repramuniverse and I have any questions that are in the pictures.

Reply Quote

Attachments:
open | download - 1.png (476.2 KB)
open | download - prusa_i3_printed_parts_yellow_big.png (312 KB)

tjb1

Re: Endstop for the X axis on Prusa i3 from repramuniverse
January 03, 2014 08:53AM

Registered: 13 years ago
Posts: 553

Why not ask repramuniverse? Unless someone here specifically has that kit I doubt you will get much information useful to the pieces you have.

Can you flip that endstop vertically and make it hit the motor? That is how I do it on my i3.

Reply Quote

NormandC

Re: Endstop for the X axis on Prusa i3 from repramuniverse
January 03, 2014 04:33PM

Registered: 13 years ago
Posts: 730

There are many Prusa i3 variations out there. In your second picture, the fork-like parts at the right of your red arrow are the X and Z endstop holders. They go over the smooth rods.

You can see the X and Z endstop holders in this picture.