PETG - why isn't it taking over?
Posted by Ralph.Hilton
|
PETG - why isn't it taking over? September 04, 2014 12:53PM |
Registered: 10 years ago Posts: 439 |
I got some PETG yesterday and have been trying it out. It seems much better than PLA or ABS for a general purpose filament.
No smell.
Minimal warping.
Adheres well to glass without hairspray etc.
No bed fan cooling needed.
Good layer adhesion.
Very strong.
Is there a downside I have yet to discover?
No smell.
Minimal warping.
Adheres well to glass without hairspray etc.
No bed fan cooling needed.
Good layer adhesion.
Very strong.
Is there a downside I have yet to discover?
|
Re: PETG - why isn't it taking over? September 04, 2014 12:56PM |
Registered: 9 years ago Posts: 269 |
|
Re: PETG - why isn't it taking over? September 04, 2014 01:40PM |
Registered: 10 years ago Posts: 439 |
|
Re: PETG - why isn't it taking over? September 04, 2014 07:25PM |
Registered: 9 years ago Posts: 105 |
|
Re: PETG - why isn't it taking over? September 05, 2014 04:56AM |
Registered: 10 years ago Posts: 439 |
It isn't shown on their site yet:
[www.ecoreprap.com]
You can email "ECO Lucia" analucia@ecoreprap.com
for orders.
Edited 1 time(s). Last edit at 09/05/2014 04:57AM by Ralph.Hilton.
[www.ecoreprap.com]
You can email "ECO Lucia" analucia@ecoreprap.com
for orders.
Edited 1 time(s). Last edit at 09/05/2014 04:57AM by Ralph.Hilton.
|
Re: PETG - why isn't it taking over? September 05, 2014 07:47AM |
Admin Registered: 11 years ago Posts: 3,096 |
I can get it for 35 euros in the Netherlands.
Printing temperature : 215°C - 235°C
It sounds like a good material to try, but it's twice as expensive as PLA so it's not worth it for me to 'try' as I have lots of PLA still. And it's only available in white.
Edited 1 time(s). Last edit at 09/05/2014 07:47AM by Ohmarinus.
http://www.marinusdebeer.nl/
Printing temperature : 215°C - 235°C
It sounds like a good material to try, but it's twice as expensive as PLA so it's not worth it for me to 'try' as I have lots of PLA still. And it's only available in white.
Edited 1 time(s). Last edit at 09/05/2014 07:47AM by Ohmarinus.
http://www.marinusdebeer.nl/
|
Re: PETG - why isn't it taking over? September 05, 2014 08:55PM |
Registered: 9 years ago Posts: 105 |
Quote
Ralph.Hilton
It isn't shown on their site yet:
[www.ecoreprap.com]
You can email "ECO Lucia" analucia@ecoreprap.com
for orders.
Thanks I will give them a email.
Mike
|
Re: PETG - why isn't it taking over? September 10, 2014 11:35AM |
Registered: 10 years ago Posts: 790 |
It's more difficult to extrude into filament than ABS or PLA, which is where the price comes into play [learned the same, but more extreme, about PVA].
Realizer- One who realizes dreams by making them a reality either by possibility or by completion. Also creating or renewing hopes of dreams.
"keep in mind, even the best printer can not print with the best filament if the user is the problem." -Ohmarinus
Realizer- One who realizes dreams by making them a reality either by possibility or by completion. Also creating or renewing hopes of dreams.
"keep in mind, even the best printer can not print with the best filament if the user is the problem." -Ohmarinus
|
Re: PETG - why isn't it taking over? November 15, 2014 08:53AM |
Registered: 10 years ago Posts: 444 |
Sorry, only registered users may post in this forum.