I used Paint to create my own logo
and just replaced the big logo section with mine in DOGMbitmaps.h
needed to uncoment
#define START_BMPHIGH
and respecting the size of 112x38
using "LCD ASSISTANCE" to convert BMP to hex file
set as
Bite orientation = "Horizontal"
size endiannes = "BIG"
save the output into a "filename.txt"
and copy / paste
Of course you would need to modify in the Config.h the
#define STRING_VERSION " show your words here"
and done!

Hope this help you to have a little more of fun!

Okay forgot to add
This is on the 12864 full graphic LCD controller
That I bought from ebay 15.5 US
Cheers!

Edited 1 time(s). Last edit at 04/02/2015 04:20AM by Bobyni.

Ah!
if you want to change the "ready"
go to language section (use Ctrl+alt+right /left to navigate in Arduino IDE to different tabs)
for the "Ready" , obvioudly is English
#define WELCOME_MSG MACHINE_NAME " ready."

show your welcome pics!
Cheers

Hey, I'll check this out later, it look interesting

---

http://www.marinusdebeer.nl/

No big things! But just to make it show your "custom" boot up!
Cheers!