PLA in yellow, magenta, cyan?

Hi guys,
I found yellow and magenta PLA but no cyan/türkis. Would be nice to know, if anyone had a link for me?!

THX
Olaf

Hmmm....CMYK. There is a group out of Europe somewhere that is making a "diamond" hot end that takes three Hexagon's and puts them out at one point. Multi-color printing but it would have some lag in it. Very interesting...

Ooops, you read my mind...
I banged my head this morning and made a drawing of a flux-compensator...

Not really, it´s just an idea for a single hotend with 5 extruder inputs on it. Looks like a hedgehog
Only missing cyan to print full color rainbows and unicorns, hehe

-Olaf
just added a quick and dirty sketch of the hotend. Black, white, yellow, cyan, magenta filament from the sides. heating element from the top and tempsensor in the vertical hole.

Edited 1 time(s). Last edit at 05/10/2015 02:30PM by o_lampe.

Google is your friend... e.g. http://filamentcentral.com/index.php?route=product/product&product_id=125 and this

Add one more extruder input for transparent. And some mechanism to thoroughly mix the molten filament.

The Diamond hot end can be found on Kickstarter.

Haha,
typical me! I always come too late with my ideas...

Although I´m interested how the Diamond nozzle is able to print lighter or darker colors? My design would mix white and black into the three other colors and you´d have real full color printing....

Also it wouldn´t be neccessary to put these huge cooling fins on each extruder, the heat spreads now on 3 extruders ( or 5 in my case ) therefor the individual cooling area can be 1/3 or 1/5 the surface.

Denmark is not to far from here, maybe I contact them for collaboration?
Do they have a user group here? Just checked...there were only small waves of enthusiasm crashing through this forum. Impressing, they made their kickstarter goal in just two days!
Olaf