Welcome! Log In Create A New Profile


Merlin Hot End with E3D Titan

Posted by Fezik 
Merlin Hot End with E3D Titan
July 07, 2016 05:35PM

Recently I got a Merlin hot end and an E3D Titan extruder. I just realized that the groove mount sizings were different. Is there an adapter/groove mount that will work with the Titan? I am really looking forward to printing with the Merlin in direct drive with this extruder.

Thank you
Re: Merlin Hot End with E3D Titan
July 08, 2016 04:58AM
Hello and welcome.

How much different in size and in which direction? I presume you mean the diameter of the groove mount on the Merlin is smaller than the groove in the titan? Should be easy enough to design and print a sleeve to fit over it so that it fits. How's your CAD?

If you are unsure how to do this post the dimensions and some photos, I am sure we knock up an adaptor easy enough.


[www.precisionpiezo.co.uk] Accurate, repeatable, versatile z-probe plus piezo discs, endstop cables, pt100, 50w heaters. PT1000 cartridge sensors plug straight into duet boards and others.
Sorry, only registered users may post in this forum.

Click here to login