Looking for wiring/pinout info for Chinese 3 axis board.
Posted by Nikki81
|
Looking for wiring/pinout info for Chinese 3 axis board. July 07, 2018 03:21PM |
Please could some one tell me the pinout for the green headers I have looked all over the internet but not found any info.
Thanks Nikki
Thanks Nikki
|
Re: Looking for wiring/pinout info for Chinese 3 axis board. July 07, 2018 11:08PM |
Its a very common 3 axis cnc / laser controller
The left most green is just power out clearly marked - and + on the board
The other green is power input, but cant find pins, it seems your meant to use the barrel jack
best I can find is
from [www.aliexpress.com]
Edited 1 time(s). Last edit at 07/07/2018 11:10PM by Dust.
The left most green is just power out clearly marked - and + on the board
The other green is power input, but cant find pins, it seems your meant to use the barrel jack
best I can find is
from [www.aliexpress.com]
Edited 1 time(s). Last edit at 07/07/2018 11:10PM by Dust.
Sorry, only registered users may post in this forum.