Welcome! Log In Create A New Profile


New board

Posted by ntar827 
New board
September 26, 2018 05:46PM
Asked this question a few months ago. My Monoprice printer has a Melzi board. Is it true that auto leveling cannot be added with a Melzi board? If true, what board is recommended as a replacement?

If the recommended board will not fit in the printer control enclosure, I will get a larger box.


Re: New board
September 27, 2018 06:30AM
here is a general list


I'm a big fan of ramps, because it is easy to find support and several people have it in use.
Re: New board
September 27, 2018 06:44AM
There are different version of the melzi
The older is a 644p chip, If its got that, no way in hell will it fit. it only has 64K of flash ram.
If you have the newer 1284p chip the board has 128k of flash ram (where the program sits) this is insufficient for all marlin features but..
Some auto leaving can be added, but not all types (eg ubl, very unlikely to fit this feature)

see [www.youtube.com] for more details and possible ways around it (by removing other features)

Edited 2 time(s). Last edit at 09/27/2018 06:56AM by Dust.
Sorry, only registered users may post in this forum.

Click here to login