First Build - Got Kit Cheap

So picked up a I3-LS450 printer really cheap at a garage sale. New in box, never been opened. For $30.00

Building it has been a challenge, because a lot of guides are not correct and a missing several steps. Can anyone point me to the right location to get build information that is correct or a least to get me over my latest hurdle.

I attached a photo of the printer I found. The box just says Let's Print Model I3-LS450.

Look forward to getting this built and testing it out.

Sell it for 50 or "you are entering a world of pain"

---

"A comical prototype doesn't mean a dumb idea is possible" (Thunderf00t)

Hey $30 is a good find. Have fun tinkering with that thing.

Edited 1 time(s). Last edit at 04/19/2020 10:55AM by obelisk79.

Searched the web all I found was an advertisement here

I could not find any Assembly Manuals or videos. This web site it says that there is a detailed CD that is included with the 3D Printer.
Here it gives a little more information though not nearly enough.

Have any question post we will be here to help.

Edited 1 time(s). Last edit at 04/19/2020 12:58PM by Roberts_Clif.

---

Computer Programmer / Electronics Technician

Sometimes they come with a file on a micro SD card. The card also has the firmware etc. The firmware should already be flashed its just a backup.

+1 for the micro-SD card, or also maybe a USB stick or mini-CD.

Otherwise, I'd scout AliExpress for the same printer photo... you might be able to find instructions that way. Or use Tineye.com to search the Net for that photo.

Also try this forum which is for Prusa variants... maybe maybe someone will recognise the photo there.

Edited 2 time(s). Last edit at 04/21/2020 11:24PM by frankvdh.