Makergear Prusa coming to life!

After following Reprap for about a year I finally decided to take the plunge with a Makergear kit. I've been reading through these forums for about the last month gleaning as much info as I could, and wow has it helped me during my build! Massive props to everyone here for all their contributions. I still have a long way to go but have gotten the main chassis built, electronics soldered and working, and have gotten the Y-axis to respond to commands. I've been documenting my build as best I can, maybe it will help someone else in their endeavors.

Basic configuration:
Makergear Prusa kit
RAMPS 1.2 (ultimachine.com)
heated bed
1.75mm filament drive with 0.35mm nozzle
Sprinter firmware
Repsnapper
Skeinforge

---

Germanicus

Hi Germanicus - if you have questions or want to discuss your build with others who are actively building MakerGear Prusas, stop by the MakerGear IRC channel.

Rick

Edited 1 time(s). Last edit at 06/18/2011 02:36PM by makergear.

makergear Wrote:
-------------------------------------------------------
> Hi Germanicus - if you have questions or want to
> discuss your build with others who are actively
> building MakerGear Prusas, stop by the MakerGear
> IRC channel.
>
> Rick

Thanks Rick! I got some useful advice today in IRC and have now made two successful test prints! Next thing is to design a shotglass so I can properly christen my printer!