Welcome! Log In Create A New Profile

Replcace Rotary Encoder

Posted by Das Sams

Das Sams

Replcace Rotary Encoder
August 08, 2022 01:51PM

Registered: 2 years ago
Posts: 4

Hey guys!

I just got a secondhand Beast V2 from cultivate3D, which is equipped with a RepRap Full Graphic Smart Controller for controls. Unfortunately, during transport, the rotary encoder was pysically damaged and does not work anymore. Is there a suitable replacement part that I can solder in or anything else besides swapping the entire LCD board?

Thanks for any advice

Reply Quote

Dust

Re: Replcace Rotary Encoder
August 08, 2022 08:59PM

Admin
Registered: 14 years ago
Posts: 7,203

The encoder with switch is a standard component on a RepRap Full Graphic Smart Controller

There are different height and types of shafts... It depend what knob they used on it.

one seller I use is [www.aliexpress.com]

Edited 1 time(s). Last edit at 08/08/2022 09:01PM by Dust.

Reply Quote

Das Sams

Re: Replcace Rotary Encoder
August 09, 2022 04:33AM

Registered: 2 years ago
Posts: 4

Quote
Dust
The encoder with switch is a standard component on a RepRap Full Graphic Smart Controller

There are different height and types of shafts... It depend what knob they used on it.

one seller I use is [www.aliexpress.com]

I'm not sure about the pinout, is it standardized or how else can I know it fits the one built in?

Reply Quote

Dust

Re: Replcace Rotary Encoder
August 09, 2022 05:18AM

Admin
Registered: 14 years ago
Posts: 7,203

Its a standard foot print.

3 pins are encoder, 2 pins are switch, + 2 tabs to a fix it securely.

Reply Quote

Dust

Re: Replcace Rotary Encoder
August 09, 2022 05:20AM

Admin
Registered: 14 years ago
Posts: 7,203

It also provides full dimensions on the page!

you just have to actually go look!

Reply Quote

Das Sams

Re: Replcace Rotary Encoder
August 09, 2022 10:16AM

Registered: 2 years ago
Posts: 4

Quote
Dust
Its a standard foot print.

3 pins are encoder, 2 pins are switch, + 2 tabs to a fix it securely.

So I assume all the pins do the same as the ones on the original.

Reply Quote

Das Sams

Re: Replcace Rotary Encoder
August 09, 2022 10:19AM

Registered: 2 years ago
Posts: 4

Quote
Dust
It also provides full dimensions on the page!

you just have to actually go look!

I've had a look at the website, but as I was afraid of choosing a part that has an incompatible pinout (not physically, in regards to what the pins function is) I chose to stay on the save side and ask if it's compatible.

Edited 1 time(s). Last edit at 08/09/2022 10:21AM by Das Sams.