Welcome! Log In Create A New Profile

new to the forum / printed parts question

chris@BCR

new to the forum / printed parts question
July 11, 2012 02:49PM

Registered: 13 years ago
Posts: 2

Hey Guys,

Just wanted to say Hi - I just picked up a Prusa Mendel kit for our company - figured it would come in handy for some basic rapid prototyping!

We havent had a chance to get it up and running yet due to a bad batch of printed parts ordered online.... is there anyone out there with a couple extra shaft couplers for the vertical stepper motor control? (See attached image)

Thanks!

Chris Caswell
BC Robotics
[www.bc-robotics.com]

Reply Quote

Attachments:
open | download - brokenpart.jpg (64.7 KB)

Sublime

Re: new to the forum / printed parts question
July 11, 2012 03:38PM

Registered: 14 years ago
Posts: 2,947

There are very few people in the Vancouver area currently. We have a Fraser Valley group that is much more active then this one. We also have a group at www.3D604.org that covers the entire lower mainland and someone there may be able to help you. I would offer to print them but all of my machines are running 24/7 printing Tantillus parts right now.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

james glanville

Re: new to the forum / printed parts question
July 11, 2012 03:47PM

Registered: 17 years ago
Posts: 332

I can't offer you parts, but get the newer prusa2 style z couplings (nophead style). They're just so much better.

Reply Quote

johnbiehler

Re: new to the forum / printed parts question
July 11, 2012 05:54PM

Registered: 14 years ago
Posts: 99

I second James' suggestion of the Nophead style couplings.

I can print you some if nobody else has already offered.

[johnbiehler.com]

Reply Quote

chris@BCR

Re: new to the forum / printed parts question
July 11, 2012 06:09PM

Registered: 13 years ago
Posts: 2

johnbiehler Wrote:
-------------------------------------------------------
> I second James' suggestion of the Nophead style
> couplings.
>
> I can print you some if nobody else has already
> offered.

That would be great for now - give me a shout through my email .

In time i will track down some of the nophead style but right now i would like to get it up and running as soon as possible!

Thanks and i will check out the google group smiling smiley