Démarrage PRUSA REWORK I3 May 06, 2015 12:18PM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 07, 2015 04:45PM |
Registered: 9 years ago Posts: 2 |
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true --> Changé en false par SCAROU #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN #define X_HOME_DIR 1 //-1 --> Changé en 1 par Scarou #define Y_HOME_DIR -1 #define Z_HOME_DIR -1
Re: Démarrage PRUSA REWORK I3 May 08, 2015 02:55AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 03:34AM |
Registered: 9 years ago Posts: 26 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 03:50AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 03:59AM |
Registered: 9 years ago Posts: 26 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 04:27AM |
Registered: 9 years ago Posts: 2 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 04:49AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 05:12AM |
Registered: 9 years ago Posts: 32 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 05:34AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 08:05AM |
Registered: 9 years ago Posts: 418 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 09:27AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 02:06PM |
Registered: 9 years ago Posts: 543 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 02:24PM |
Registered: 10 years ago Posts: 205 |
Re: Démarrage PRUSA REWORK I3 May 08, 2015 02:39PM |
Registered: 10 years ago Posts: 477 |
Quote
oikos
Sinon tu as aussi "Cura" qui combine tout, facile de prise en main, impression rapide et tranchage bien optimisé
Re: Démarrage PRUSA REWORK I3 May 08, 2015 03:10PM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 09, 2015 03:00AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 09, 2015 04:07AM |
Registered: 9 years ago Posts: 26 |
Re: Démarrage PRUSA REWORK I3 May 09, 2015 04:51AM |
Registered: 9 years ago Posts: 10 |
Re: Démarrage PRUSA REWORK I3 May 09, 2015 10:29AM |
Registered: 9 years ago Posts: 124 |