Lybina PLA review
Posted by jakjak444
|
Lybina PLA review August 05, 2013 03:46AM |
Registered: 11 years ago Posts: 25 |
Also whilst i'm on.
I recently purchased some of lybinas 3mm PLA, 300m each of Black, Red and White.
I have so far only had a chance to print with the black and it has been delightful, it is very uniform and is giving me the best prints i have ever had.
Its a little bit on the small size (2.75mm) but no problems at all.
I'm printing at 195C on 50C heated glass bed coated with pva glue.
Keep up the good work lybina, its great having an australian manufacturer with a great product and affordable prices.
I recently purchased some of lybinas 3mm PLA, 300m each of Black, Red and White.
I have so far only had a chance to print with the black and it has been delightful, it is very uniform and is giving me the best prints i have ever had.
Its a little bit on the small size (2.75mm) but no problems at all.
I'm printing at 195C on 50C heated glass bed coated with pva glue.
Keep up the good work lybina, its great having an australian manufacturer with a great product and affordable prices.
|
Re: Lybina PLA review August 05, 2013 04:16PM |
Registered: 11 years ago Posts: 126 |
|
Re: Lybina PLA review August 05, 2013 08:55PM |
Registered: 11 years ago Posts: 25 |
[shop.lybina.com]
$60 for black and white, $66 for colours + postage
300m roll = 2.5ish kg
Great product, good value and supporting an Australian company
$60 for black and white, $66 for colours + postage
300m roll = 2.5ish kg
Great product, good value and supporting an Australian company
|
Re: Lybina PLA review August 06, 2013 02:17AM |
Registered: 11 years ago Posts: 126 |
|
Re: Lybina PLA review August 27, 2013 02:57AM |
Registered: 11 years ago Posts: 25 |
Update on this:
Done some printing with the red and white filament now.
Red:
Colour: little bit pinkish, fairly opaque.
Size: 2.6 - 2.86, Mostly around 2.65.
Print temp: 195-200, no problems.
White:
Colour: white, opaque
Size:3.00-3.15
Print temp: 195-200, no problems.
Summary: still pretty good, the dimensional tolerance is significantly varied between spools and varies upto +-0.1mm on a spool.
Done some printing with the red and white filament now.
Red:
Colour: little bit pinkish, fairly opaque.
Size: 2.6 - 2.86, Mostly around 2.65.
Print temp: 195-200, no problems.
White:
Colour: white, opaque
Size:3.00-3.15
Print temp: 195-200, no problems.
Summary: still pretty good, the dimensional tolerance is significantly varied between spools and varies upto +-0.1mm on a spool.
Sorry, only registered users may post in this forum.