Welcome! Log In Create A New Profile

SD Card interface by LC Studio SDCARDDETECT hack

Posted by disneytoy

Forum List Message List New Topic

disneytoy

SD Card interface by LC Studio SDCARDDETECT hack
October 08, 2013 03:36PM

Registered: 14 years ago
Posts: 138

Hi!

I'm trying to add a SD Card interface board made by LC Studio/lcsoft.net

Arduino-SD-Card-Logging-Shield.jpg

I want to do the SDCARDDETECT Hack, but not sure what pin I need to solder the wire to?

Any help please.

Thanks

Max

Reply Quote

Justblair

Re: SD Card interface by LC Studio SDCARDDETECT hack
October 08, 2013 07:28PM

Registered: 14 years ago
Posts: 73

Sorry it's a rotten picture but this might help
Google+ piccie

The white wire detects the Sd card. The pins it is soldered to is normally 3v. I cut the trace on the board to disconnect the pin from the 3v trace and then soldered the white wire to the broken trace on the pin side.

Edited 1 time(s). Last edit at 10/09/2013 03:47AM by Justblair.

Reply Quote

disneytoy

Re: SD Card interface by LC Studio SDCARDDETECT hack
October 09, 2013 01:32PM

Registered: 14 years ago
Posts: 138

So its the 5th pin from the top.

Reply Quote

Justblair

Re: SD Card interface by LC Studio SDCARDDETECT hack
October 09, 2013 02:34PM

Registered: 14 years ago
Posts: 73

Yep

Reply Quote

sanzr

Re: SD Card interface by LC Studio SDCARDDETECT hack
January 07, 2014 01:06PM

Registered: 12 years ago
Posts: 2

Quote
Justblair
Yep

Hello justblair I am trying run this sd to my ramps 1.4

But I not understand the photo of second commentary

it is i understand