Welcome! Log In Create A New Profile


Duet Case With Squirrel Cage Blower STLs (attached)

Posted by patrickrio 
Duet Case With Squirrel Cage Blower STLs (attached)
September 20, 2015 05:29PM
This case is a combination of some other cases on Thingiverse... designed to increase Duet PCB cooling with a standard squirrel cage blower available on Amazon.


Figured others might want to use this or build off of it:

Design features:

1. FAN!!!!
2. Big vents on top
3. Fan blows about half above and half below Duet PCB
4. Finger Hole for hitting reset button
5. Hole for MicroSD is slightly larger so you can push with finger to remove.
6. Height of case allows the lid to be used with standard Molex connectors.

Designed to work with these fans (12v and 24v)



open | download - Duet Case with Fan.stl (277 KB)
open | download - Duet Case Lid.stl (684 bytes)
Sorry, only registered users may post in this forum.

Click here to login