Welcome! Log In Create A New Profile

Advanced

Radds 1.5 and bluetooth

Posted by filipeCampos 
Forum List Message List New Topic
filipeCampos
Radds 1.5 and bluetooth
October 14, 2015 08:39AM
hi,

I have an radds 1.5 board, i would like to now how to connect an Bluetooth directly in the board (without the use of extension board)?

I really like the radds board, is well made. For several day i trying to get more information of the board and i found the main discussion and support of this board is made in German.
If radds is selling worldwide, why the main support is not in English?
Reply Quote
VDX
Re: Radds 1.5 and bluetooth
October 14, 2015 09:59AM
... AFAIK it's simply feeding the RX/TX-pins of one of the serial ports and +5V/GND to the module and activate the port in the software.

Here is an english documentation - [max3dshop.org]

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Reply Quote
filipeCampos
Re: Radds 1.5 and bluetooth
October 14, 2015 10:31AM
ok, thanks
Only to confirm, these are the pins i need to use:

Reply Quote
VDX
Re: Radds 1.5 and bluetooth
October 14, 2015 06:06PM
... yes, this is my bet too winking smiley

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Reply Quote
alfredanil
Re: Radds 1.5 and bluetooth
October 16, 2015 03:11AM
Which bluetooth module is idealy suitable for RADDS 1.5?
Reply Quote
filipeCampos
Re: Radds 1.5 and bluetooth
October 16, 2015 03:57AM
Bluetooth 4 pin rs232 hc-06
Search in ebay...
Reply Quote
angelo
Re: Radds 1.5 and bluetooth
October 16, 2015 05:26AM
comming soon :



[www.dr-henschke.de]

Mein Club: [hackerspace-ffm.de]
RADDS-Shield -> Commercial [max3dshop.org]
Reply Quote
[email protected]
Re: Radds 1.5 and bluetooth
October 23, 2015 04:25AM
Fine!... I'm waiting for this extension board, mainly because I need two more stepper drivers!...smiling smiley

Gianni.
Reply Quote
alfredanil
Re: Radds 1.5 and bluetooth
October 23, 2015 05:08AM
what about extra thermistors and mosfets? extra extruders need them as well, right !!!
Reply Quote
angelo
Re: Radds 1.5 and bluetooth
October 23, 2015 07:13AM
5 Thermistors
1 Thermocouple
5 + 1 Mosfet (Regular 3 Hotend 2 Fan 1 Heatbed -> 5 Hotend and 1 Heatbed also Possible with permanent Fan on)

Mein Club: [hackerspace-ffm.de]
RADDS-Shield -> Commercial [max3dshop.org]
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login