troubleshooting with TFT28 V1.2
Posted by jmn47
|
troubleshooting with TFT28 V1.2 June 18, 2016 11:41AM |
hi evrybody
i bought a MKS SBASE and a TFT28 V1.2 from China.
At first launch of the screen, it's work, the icon is in chinese.
But when i did the upgrade with the firmware on the SD card, the icon become blurred...
I'm tested all firmware from Github but it's the same thing.
Does someone have an idea to fix that?
thanks
(sorry for my english i'm french)
i bought a MKS SBASE and a TFT28 V1.2 from China.
At first launch of the screen, it's work, the icon is in chinese.
But when i did the upgrade with the firmware on the SD card, the icon become blurred...
I'm tested all firmware from Github but it's the same thing.
Does someone have an idea to fix that?
thanks
(sorry for my english i'm french)
|
Re: troubleshooting with TFT28 V1.2 June 24, 2016 07:36AM |
i have the MKS SBASE V1.2 but the pb not came from the MKS SBASE.
the screen is power supply without the SBASE, with 12V and i set the jumper on the rear of the TFT28 to 12v.
I don't need SBASE to update the firmware of the screen.
this is some exemple when i upgrade the firmware
the updating seems good, and the home screen is good too, it's just the button that is not displayed correctly
the screen is power supply without the SBASE, with 12V and i set the jumper on the rear of the TFT28 to 12v.
I don't need SBASE to update the firmware of the screen.
this is some exemple when i upgrade the firmware
the updating seems good, and the home screen is good too, it's just the button that is not displayed correctly
|
Re: troubleshooting with TFT28 V1.2 June 24, 2016 11:38PM |
Where did you find the firmware? The image you show is not from MKS own Github firmware.Quote
jmn47
i have the MKS SBASE V1.2 but the pb not came from the MKS SBASE.
the screen is power supply without the SBASE, with 12V and i set the jumper on the rear of the TFT28 to 12v.
I don't need SBASE to update the firmware of the screen.
this is some exemple when i upgrade the firmware
the updating seems good, and the home screen is good too, it's just the button that is not displayed correctly
At least none of my displays had that logo.
Did any of you modify your firmware?
Edited 1 time(s). Last edit at 06/24/2016 11:39PM by dintid.
My Instructables - both total newbie instructables and some for intermediate users.
My Designs on Thingiverse
YouTube channel containing a few 3D printing videos - they are videos for my Instructables, and mostly not standalone.
Ultius / Tantillus Thingiverse Group
|
Re: troubleshooting with TFT28 V1.2 June 25, 2016 02:57AM |
yes it came from your own MKS Github, it's the french firmware...
i modify anything
this is with the english firmware V1.1.4
i modify anything
this is with the english firmware V1.1.4
|
Re: troubleshooting with TFT28 V1.2 June 29, 2016 08:28AM |
Quote
karabas
Quote
dintid
You know how to assign 2 gcode commands to a single icon in the more section? Like raise hotend 20mm and then extrude 10mm filament? Should each command be seperated, or?
.
I think as function in config ( didnot try myself)
# "Function" command line
> Function_btn1_cmd: M84;
> Function_btn2_cmd: G28; G29;
Yea, makes sense
You can by the way hide or show those two icons and change their functions if you like (I bet you allready knew that, but just wanted to say it anyway
)My Instructables - both total newbie instructables and some for intermediate users.
My Designs on Thingiverse
YouTube channel containing a few 3D printing videos - they are videos for my Instructables, and mostly not standalone.
Ultius / Tantillus Thingiverse Group
|
Re: troubleshooting with TFT28 V1.2 June 30, 2016 05:03AM |
No I didnot, thanx. Now I have noticed display control lines in configQuote
dintid
Quote
karabas
Quote
dintid
You know how to assign 2 gcode commands to a single icon in the more section? Like raise hotend 20mm and then extrude 10mm filament? Should each command be seperated, or?
.
I think as function in config ( didnot try myself)
# "Function" command line
> Function_btn1_cmd: M84;
> Function_btn2_cmd: G28; G29;
Yea, makes sense
You can by the way hide or show those two icons and change their functions if you like (I bet you allready knew that, but just wanted to say it anyway
|
Re: troubleshooting with TFT28 V1.2 July 03, 2016 03:42AM |
I found some really nice images from majurca and its on github now my LCD looks great.
https://github.com/majurca/MKS-TFT28-NEW-PICTURES
https://github.com/majurca/MKS-TFT28-NEW-PICTURES
|
Re: troubleshooting with TFT28 V1.2 July 11, 2016 12:28PM |
Updated mine to above buttons some are missing but i will go through it proper and see if i can fix them, i had trouble get the custom logo i edited after few tries done it but not perfect,
my tft is 32 version and found i had to save the file as a 16bit bmp then in the lcd program obviously 16bit width 320 height 240
Check my rubbish blog for my prusa i3
up and running
[3dimetech.blogspot.co.uk]
my tft is 32 version and found i had to save the file as a 16bit bmp then in the lcd program obviously 16bit width 320 height 240
Check my rubbish blog for my prusa i3
up and running
[3dimetech.blogspot.co.uk]
|
Re: troubleshooting with TFT28 V1.2 September 03, 2016 12:23PM |
Updated for firmware 1.1.4, all graphics/buttons available 
|
Re: troubleshooting with TFT28 V1.2 November 20, 2016 05:01AM |
Quote
majurca
Updated for firmware 1.1.4, all graphics/buttons available
Great work and thanks for sharing!!!
|
Re: troubleshooting with TFT28 V1.2 November 30, 2016 05:20PM |
Thanks chriss
That did the trick. I was never too too comfortable with image file systems and definitions and now I am totally confused.
Why is it that softwares aren't in sync or am I wrong again?)
Anyways thanks a bunch. I am back to designing.
Cheers
That did the trick. I was never too too comfortable with image file systems and definitions and now I am totally confused.
Why is it that softwares aren't in sync or am I wrong again?
)Anyways thanks a bunch. I am back to designing.
Cheers
Sorry, only registered users may post in this forum.