Hi,

I've had good luck compiling the individual test scripts for the Arduino... but the /snap/Single_Arduino_SNAP/Single_Arduino_Snap.pde will not compile for me.

BTW, I'm on 64bit Ubuntu 7.10... but like I said, the Arduino is working fine with the various RepRap board testing scripts, so I don't think that 64bit is a factor.

I've tried both the latest from SVN and the download zip files. I've also copied the library files into my hardware/libraries tree.

===============

I get about 40 lines of errors, here are the first ones:

ThermoplastExtruder_SNAP_v1.cpp:1:41: error: ThermoPlastExtruder_SNAP_v1.h: No such file or directory
ThermoplastExtruder_SNAP_v1.cpp:7: error:

Edited 1 time(s). Last edit at 12/23/2007 09:16PM by RoundSparrow.

Ok, the SVN revision 1210 at least... there was a problem with the include filename having "P" in "Plast" capitalized.

Got past that.

SVN revision 1217 still seems to have the problem with the include filename "P" in "plast".

I found out to actually get the libraries to update (compile from source), you have to manually delete all the .o files in the library tree, otherwise the software skips compiling them. Is there a way to "rebuild all" and force it to recompile?

Edited 2 time(s). Last edit at 12/24/2007 12:25PM by RoundSparrow.

hey,

make sure you copy over the files in the arduino/library folder to the library folder in your arduino environment. the libraries are still getting shifted around a bit.

there is more info in the README in the arduino release on where these locations are. i know for a fact that the firmware in the release on sourceforge will compile, and also that the latest suvbversion one will compile (not fully tested yet...)

I have installed the arduino software that Zach wrote from his release and if you copy the library files where they belong it will compile without error. There were so warning but these do not cause the software to build or run.

---

Bob Teeter
"What Box?"