Welcome! Log In Create A New Profile

is TB6560 can drive this motor?

Posted by okuzster

okuzster

is TB6560 can drive this motor?
April 04, 2019 04:09AM

Registered: 7 years ago
Posts: 64

i posted it also under step motors but didn't get what i am looking for.
the motor is ELWOOD GETTYS M21-23E-6108CU

it says 1.4V and 3.8 amps for motor, if i get it right, driver would give it higher voltage and lower amper, can i adjust it?

Reply Quote

Dust

Re: is TB6560 can drive this motor?
April 04, 2019 04:36AM

Admin
Registered: 12 years ago
Posts: 6,859

you normally run steppers at many times the voltage and up to the rated current

Lesser current will result in less torque, but it should move before then.
Depends how much torque you need for what ever your doing...

You can't adjust a steppers characteristics without rewiring it

Reply Quote

VDX

Re: is TB6560 can drive this motor?
April 04, 2019 05:34AM

Admin
Registered: 16 years ago
Posts: 13,788

... you'll need at least 2 Amps for proper functioning ... but it should move (slower and without much power) with only 1 Amp too.

What's the planned application?

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Reply Quote

okuzster

Re: is TB6560 can drive this motor?
April 04, 2019 07:34AM

Registered: 7 years ago
Posts: 64

TB6560 is 3 Amps if i am not wrong, so it should work.

a friend gave me it, who bought it to make a guitar pickup winder. so i can follow his way and try to make one.

he said it is broken, he couldn't make it run and was throwing it. but as i get it he didn't use any driver. not sure what he did, didn't ask for details. but motor itself can be damaged, i will see if it's running first.

Reply Quote

VDX

Re: is TB6560 can drive this motor?
April 04, 2019 08:57AM

Admin
Registered: 16 years ago
Posts: 13,788

... you can measure the resistance to identify the windings.

And a simple test is to move it by hand, shorten the respective windings and check, if the cunter-torque changes while turning ...

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Reply Quote

okuzster

Re: is TB6560 can drive this motor?
April 04, 2019 10:59AM

Registered: 7 years ago
Posts: 64

i couldn't think about shortening the wires and check for counter torque, thanks!

motor is not with me now, will check it tomorrow.