Welcome! Log In Create A New Profile

Advanced

Reprap Discount Full Graphic LCD Controller - Blue Screen

Posted by Henrique 
Reprap Discount Full Graphic LCD Controller - Blue Screen
July 18, 2025 03:33PM
Hi everyone!

I have a Full Graphic LCD Controller that starts blue screen after the print starts.
Before comanding the print, the screen shows the status normally.
Bul after the print starts, the blue screen appears.
Sometimes starnge caracthers appear at any moment.
Does anybody know how to fix this?
Thanks!
VDX
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 18, 2025 04:21PM
... can you measure the +5V for the controller, if it breaks down?


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 18, 2025 06:10PM
I dont know where to measure this.
Is there a pin at ramps?
VDX
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 05:44AM
... there should be several pins, marked with "+5" and "GND" -- connect a multimeter and look, if the 5V level drops, if printing starts ... most likely with unsufficient current from the PS


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 07:53AM
Ok, thank you.
I understood.
But is there a way to keep the 5V level constant? Even after the printing starts?
I believe that this blue screen starts after the BLTouch pins down.
But even with the blue screen lighted, the printing begins and goes up to the end.
I am still asking myself how to keep this 5V level.
VDX
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 01:02PM
... if it's lack of current, then a "stronger" PS will help smoking smiley


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 03:19PM
Sorry, but I could not understand what you meant PS?
Thanks!
VDX
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 03:46PM
... PS = Power-Supply or -Source


Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Reprap Discount Full Graphic LCD Controller - Blue Screen
July 19, 2025 03:47PM
OK. Sorry. It is the Power Supply.
Sorry, only registered users may post in this forum.

Click here to login