Announcing the Reality 3D version 2  November 22, 2012 01:57AM |
Hello Friends!
Here's the second workhorse from the stable - the R3D2
This is a PrintrBoard based machine. Highlights include:
Micro SD card: You can now save your design onto an SD card and print from it. No computer necessary!
LCD & Jog dial: All the printer operation commands can be issued right off the printer. Pronterface not needed!
Standalone printing: No more failed prints because of "EMI problems" on USB ports (if you're neck deep into home 3D printing, you know what a relief this is!)
Silent operation: The motors are 1/16 microstepped (was 1/8 in Version 1). The motors are dead silent!
Better aesthetics: The top is clean - no Z belt as found on version 1 printer.
Pls download the brochure here.
To buy please visit our store.
Here's the second workhorse from the stable - the R3D2
This is a PrintrBoard based machine. Highlights include:
Micro SD card: You can now save your design onto an SD card and print from it. No computer necessary!
LCD & Jog dial: All the printer operation commands can be issued right off the printer. Pronterface not needed!
Standalone printing: No more failed prints because of "EMI problems" on USB ports (if you're neck deep into home 3D printing, you know what a relief this is!)
Silent operation: The motors are 1/16 microstepped (was 1/8 in Version 1). The motors are dead silent!
Better aesthetics: The top is clean - no Z belt as found on version 1 printer.
Pls download the brochure here.
To buy please visit our store.
Sorry, only registered users may post in this forum.