I have a little problem regarding parts printed from STL files. Probem seems to be that parts lister, BOM lists and STL files on sourceforge all list different parts and I don't know anymore which parts I need!

I have downloaded cartesian_bot 1.0.6 zip file containing STL files, but the files in there do not match BOM list on the website, nor parts lister.

Comparing to the Bill of Materials list for Cartesian robot, i have everything that list says except these:
-Studding tie bracket
-Vertical hole plug
-Bed clamp bracket
since i cannot find those STL files anywhere

Can somewhone help me out on this?

Anyone??...

The first one is this part:


named: Z-studding-tie.stl under printed parts in your zip

the vertical hole plug is (iirc) nothing but a short length of 8mm studding

The bed clamp is this part:

the stl is located in printed parts in your zip too.

'sid

The vertical hole plug is a sort of bushing that fits in an M8 hole and reduces it to M5. You can see one in the picture here: [2.bp.blogspot.com]. Ignore the other parts though, they are not part of the official design.

The filename is Corner-bracket-vertical-bolt-plug.stl

---

[www.hydraraptor.blogspot.com]