Optimized Z-bed rail- and leadscrew-arrangement June 07, 2017 06:32PM |
Registered: 7 years ago Posts: 8 |
Re: Optimized Z-bed rail- and leadscrew-arrangement June 07, 2017 09:50PM |
Registered: 11 years ago Posts: 5,780 |
Re: Optimized Z-bed rail- and leadscrew-arrangement June 08, 2017 08:31AM |
Registered: 7 years ago Posts: 8 |
Quote
the_digital_dentist
Your drawings don't include any configurations where the rails are on the outside, the screws moved inward next to them, and the bed supported between them.
Quote
the_digital_dentist
This is my belt lifted Z axis in my latest printer. It started as an experiment and I went through 3 revs of the design before I settled on one I liked, and it is working very well. It consists of two linear guides, two belts, and a 30:1 drive gear that prevents the bed from dropping when power is cut.
Re: Optimized Z-bed rail- and leadscrew-arrangement June 08, 2017 11:46AM |
Registered: 11 years ago Posts: 5,780 |
Re: Optimized Z-bed rail- and leadscrew-arrangement June 08, 2017 11:58AM |
Registered: 7 years ago Posts: 8 |